DIGITAL CAMERA User’s Manual En
Trademark Information • Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc. • Adobe and Acrobat are registered trademarks of Adobe Systems Inc. • SD and SDHC logos are trademarks of SD-3C, LLC. • PictBridge is a trademark. • HDMI, logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Introduction First Steps Basic Photography and Playback: A (Auto) Mode More on Shooting More on Playback Editing Pictures Movie Recording and Playback Connecting to Televisions, Computers and Printers Basic Camera Setup Caring for the Camera Technical Notes and Index i
For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them.
For Your Safety Observe caution when handling the battery The battery may leak or explode if improperly handled. Observe the following precautions when handling the battery for use in this product: • Before replacing the battery, turn the product off. If you are using the Charging AC Adapter/AC adapter, be sure it is unplugged. • Use only a Rechargeable Li-ion Battery EN-EL5 (supplied). Charge the battery by inserting it into the camera and connecting the Charging AC Adapter EH-68P/EH-68P (AR) (supplied).
For Your Safety Use appropriate cables When connecting cables to the input and output jacks, use only the cables provided or sold by Nikon for the purpose, to maintain compliance with product regulations. Handle moving parts with care Be careful that your fingers or other objects are not pinched by the lens cover or other moving parts. CD-ROMs The CD-ROMs supplied with this device should not be played back on audio CD equipment.
Notices Notice for Customers in the U.S.A. Federal Communications Commission (FCC) Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Notices Notice for customers in Canada CAUTION This Class B digital apparatus complies with Canadian ICES-003. ATTENTION Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Notice for customers in Europe This symbol indicates that this product is to be collected separately. The following apply only to users in European countries: • This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
Table of Contents For Your Safety ........................................................................................................................................ ii WARNINGS .................................................................................................................................................................. ii Notices .......................................................................................................................................................
Table of Contents Setting the Focus Mode ..................................................................................................................................39 Using Manual Focus...........................................................................................................................................40 Adjusting the Brightness (Exposure Compensation)..............................................................41 More on Shooting ...............................................
Table of Contents Viewing Continuously Shot Pictures (Pictures in a sequence) ............................................. 102 Viewing Multiple Pictures: Thumbnail Playback.................................................................... 104 Calendar display ................................................................................................................................................ 105 Taking a Closer Look: Playback Zoom ................................................................
Table of Contents Transferring Pictures from a Camera to a Computer.................................................................. 141 Charging While Connecting to a Computer.................................................................................... 145 Connecting to a Printer................................................................................................................... 146 Connecting the Camera and Printer......................................................................
Introduction About This Manual Introduction Thank you for your purchase of Nikon COOLPIX P100 digital camera. This manual is written to help you enjoy taking pictures with your Nikon digital camera. Read this manual thoroughly before use, and keep it where all those who use the product will read it.
Information and Precautions Life-Long Learning Introduction As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education, continually updated information is available online at the following sites: • For users in the U.S.A.: http://www.nikonusa.com/ • For users in Europe and Africa: http://www.europe-nikon.com/support/ • For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.
Information and Precautions Notice Concerning Prohibition of Copying or Reproduction Introduction Note that simply being in possession of material that was digitally copied or reproduced by means of a scanner, digital camera or other device may be punishable by law. • Items prohibited by law from being copied or reproduced Do not copy or reproduce paper money, coins, securities, government bonds or local government bonds, even if such copies or reproductions are stamped “Sample”.
Parts of the Camera The Camera Body Built-in flash raised Introduction 1 2 3 6 4 7 4 8 9 10 1 Power switch/Power-on lamp ....................................................19, 21, 145, 165 2 Mode dial........................................................... 42 3 Microphone (stereo)......................117, 127 4 Built-in flash ................................................7, 34 5 m (Flash pop-up) button....................7, 35 6 Eyelet for camera strap (at two places) ...........
Parts of the Camera 2 3 4 5 6 7 8 Introduction 1 9 18 19 20 TO PUSH 10 11 12 13 14 15 16 17 EJECT 21 22 23 1 Speaker ..................................................117, 137 13 Monitor ..................................................8, 15, 27 2 x (monitor) button .................................14 14 c (playback) button.................................32 3 Diopter adjustment control................... 14 15 d button......13, 45, 74, 107, 132, 153 4 Electronic viewfinder .....
Parts of the Camera Changing the Angle of the Monitor Introduction The angle of the monitor can be lowered down to 82° or raised upward to 90°. This is convenient when taking pictures with the camera held at high or low positions. B 6 Notes on Monitor • Do not apply excessive force when changing the angle of the monitor. • The monitor cannot be moved horizontally. • Put the monitor back in the original position when using in normal situations.
Parts of the Camera Raising and Lowering the Built-in Flash Introduction Press the m (flash pop-up) button to raise the built-in flash. • See “Using the Flash” (A34) for more information on setting the flash. • When not using the built-in flash, gently push the flash down. Attaching the Camera Strap and Lens Cap Attach the lens cap to the strap, and then attach the strap to the camera (at two places). B Lens Cap • Remove the lens cap before you shoot a picture.
Parts of the Camera The Monitor Introduction The following indicators may appear in the monitor during shooting and playback (actual display varies with current camera settings). See page 15 for details on changing the monitor display. Shooting 44 2 4 43 1 5 6 3 7 8 9 42 10 13 14 16 41 40 38 37 36 35 34 39 11 12 15 17 18 19 33 1/250 F5.6 31 26 999 20 21 24 32 25 22 30 29 28 27 23 999 9999 a 45 46 1/250 8 F5.
Parts of the Camera 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Shooting mode* ...........................26, 43, 45, 55, 59, 62, 66, 98 Focus mode......................................................38 Zoom indicator ..............................................29 Focus indicator...............................................30 AE/AF-L indicator..........................................54 Flash indicator.................................................36 Flash mode .......................
Parts of the Camera Introduction Playback 1 20 19 18 22 21 2 3 4 5 15/05/2010 12:00 9999.JPG 17 6 7 8 16 15 14 999/999 9 10 11 12 13 a 1m00s 1m00s b 1 Date of recording......................................... 22 12 Voice memo playback guide ............. 117 2 Time of recording ........................................ 22 3 Protect icon....................................................113 Sequence playback guide ................... 102 13 Movie playback guide .......................
Basic Operations The Command Dial Introduction You can rotate the command dial to select items from a menu screen or to choose and configure any of the following functions.
Basic Operations The Multi Selector Introduction This section describes standard uses of the multi selector to select modes, select menu options, and to apply selections. Operate by pressing the up, down, left, right section, or the k (apply selection) button.
Basic Operations The d Button Introduction Press the d button to display the menu and to select options for the menu items. • Use the multi selector to navigate the menus (A12). • Menu items can also be chosen by rotating the command dial. • Select a tab on the left side of the monitor to display the corresponding menu. • Press the d button again to exit the menu.
Basic Operations Help Displays Introduction Rotate the zoom control to g (j) when M is displayed at the bottom of the menu screen to view a description of the currently selected menu option. To return to the original menu, rotate the zoom control to g (j) again. White balance Shooting menu For accurate color reproduction, choose a setting that matches the light source.
Basic Operations The s (display) Button Introduction To switch between the information displayed on the monitor during shooting and playback, press the s button. For Shooting 1/250 17 F5.6 Display information Display the picture and the shooting data. 1/250 17 F5.6 Framing grids1 Information hidden Display a boxed guide for framing. Display the picture only. For Playback 15/05/2010 15:30 0004.JPG 100NIKON 0004.JPG P 1/250 F5.6 ISO 4 4 4 +1.
First Steps Inserting the Battery Insert a Rechargeable Li-ion Battery EN-EL5 (supplied) into the camera. • Charge the battery before first use or when the battery is running low (A18). 1 Open the battery-chamber/memory card slot cover. First Steps • Slide the cover latch to the Y position (1), and open the battery-chamber/memory card slot cover (2). 2 Insert the battery.
Inserting the Battery Removing the Battery Turn the camera off (A21) and confirm that the poweron lamp and the monitor are off before opening the battery-chamber/memory card slot cover. Slide the orange battery latch in the direction shown (1) and eject the battery. Pull the battery out straight (2). • Note that the battery may become hot during use; observe due caution when removing the battery.
Charging the Battery Charge the supplied Rechargeable Li-ion Battery EN-EL5 inserted into the camera, by connecting the supplied Charging AC Adapter EH-68P to the camera via the supplied USB Cable UC-E6, and then plugging the Charging AC Adapter into an electrical outlet. 1 First Steps Prepare the Charging AC Adapter EH-68P. If a plug adapter* is included, attach the plug adapter to the plug on the Charging AC Adapter. Push the plug adapter firmly until it is securely held in place.
Charging the Battery 4 Plug the Charging AC Adapter into an electrical outlet. First Steps • The camera’s power-on lamp slowly blinks orange to indicate that the battery is charging. • About three hours and 30 minutes are required to charge a fully exhausted battery. • The following chart explains power-on lamp status when the camera is plugged into the electrical outlet. Power-on lamp 5 Description Blinks slowly (orange) Battery charging. Off Not charging.
Charging the Battery B Notes on Charging AC Adapter First Steps • Do not use the Charging AC Adapter EH-68P with any device that is not supported. • Be sure to read and follow the warnings and cautions of “For Your Safety” (Aii) thoroughly before using the EH-68P. • Be sure to read and follow the warnings for “The Battery” (A176) thoroughly before using the battery. • The EH-68P is compatible with AC 100-240 V, 50/60 Hz electrical outlets.
Charging the Battery Turning On and Off the Camera C First Steps Remove the lens cap before turning on the camera. Press the power switch to turn on the camera. The power-on lamp (green) will light for a moment and the monitor will turn on. Press the power switch again to turn off the camera. When the power is turned off, both the power-on lamp and monitor turn off. • When the camera is off, holding down the c button will turn the camera on in playback mode (A32). Lens Error If Lens error.
Setting Display Language, Date and Time A language-selection dialog is displayed the first time the camera is turned on. 1 Press the power switch to turn on the camera. • The power-on lamp (green) will light for a moment and the monitor will turn on. • Remove the lens cap. First Steps 2 Use the multi selector to choose the desired language and press the k button. • For information on using the multi selector, see “The Multi Selector” (A12). 3 Choose Yes and press the k button.
Setting Display Language, Date and Time 5 Edit the date. Date 6 Choose the order in which the day, month and year are displayed. D M Y 01 01 2010 00 00 Edit Date D M Y 15 05 2010 15 First Steps • Press H or I to edit the highlighted item. • Press K to move the highlight in the following order. D (day) ➝ M (month) ➝ Y (year) ➝ hour ➝ minute ➝ DMY (the order in which the day, month, and year are displayed) • Press J to return the cursor to the previous item.
Inserting Memory Cards Image and movie files are stored in the camera’s internal memory (approx. 43 MB) or on removable memory cards (available separately) (A180). If a memory card is inserted in the camera, data is automatically stored on the memory card and data recorded to the memory card can be played back, deleted, or transferred. Remove the memory card to store data in the internal memory, or play back, delete, or transfer data from the internal memory.
Inserting Memory Cards B Formatting a Memory Card B The Write Protect Switch Memory cards are equipped with a write protect switch. When this switch is in the “lock” position, data cannot be written to, or deleted from, the memory card. If the switch is in the “lock” position, unlock it by sliding the switch to the “write” position to record or delete pictures, or to format the memory card. B First Steps If the message at the right is displayed when the camera is turned Card is not formatted.
Basic Photography and Playback: A (Auto) Mode Step 1 Turn the Camera On and Select A (Auto) Mode This section describes how to take pictures in A (auto) mode, an automatic, “pointand-shoot” mode recommended for first-time users of digital cameras. 1 Remove the lens cap and press the power switch. • The power will be turned on, and the lens will extend. • The power-on lamp (green) will light for a moment and the monitor will turn on.
Step 1 Turn the Camera On and Select A (Auto) Mode Indicators Displayed in A (Auto) Mode Vibration reduction icon Reduces the effects of camera shake. Shooting mode A is displayed in auto mode. 1/250 F5.6 17 Aperture (A67) Internal memory indicator Pictures will be recorded to internal memory (approx. 43 MB). When a memory card is inserted, C is not displayed and pictures will be recorded to the memory card.
Step 2 Frame a Picture 1 Ready the camera. • Hold the camera steadily in both hands. • Keep your fingers, hair, strap and other objects away from the lens, flash, AF-assist illuminator, microphone and speaker. Basic Photography and Playback: A (Auto) Mode 2 Frame the picture. • Position the main subject near the center of the monitor. 1/250 F5.6 17 Using the Electronic Viewfinder Use the electronic viewfinder to frame pictures when bright light makes it difficult to see the display in the monitor.
Step 2 Frame a Picture Using the Zoom Zoom out Zoom in Optical zoom Digital zoom Digital Zoom When the camera is already at the maximum optical zoom magnification, rotating the zoom control in the g direction will trigger digital zoom. The subject can be magnified up to 4× of the maximum optical zoom ratio. Focus will be on the center of the frame and the focus area will not be displayed when digital zoom is in effect. Optical zoom C Digital zoom is in effect.
Step 3 Focus and Shoot 1 Press the shutter-release button halfway. • When the button is pressed halfway, the camera focuses. • The camera focuses on the subject in the center focus area display. When the subject is in focus, the focus area display will glow green. Basic Photography and Playback: A (Auto) Mode 1/250 F5.6 • When digital zoom is in effect, the camera focuses on the subject in the center of the frame, and the focus area is not displayed.
Step 3 Focus and Shoot B During Recording While pictures are being recorded, the number of exposures remaining display will blink. Do not open the battery-chamber/memory card slot cover while pictures are being recorded. Cutting power or removing the memory card in these circumstances could result in loss of data or in damage to the camera or card. B Autofocus D Focus Lock Use focus lock to focus on off-center subjects when Center is selected for AF area mode.
Step 4 Viewing and Deleting Pictures Viewing Pictures (Playback Mode) Press the c (Playback) button. Basic Photography and Playback: A (Auto) Mode c (Playback) button • The last picture shot will be displayed in full-frame playback mode. • Press the multi selector H, I, J or K to view additional pictures. Continue holding down H, I, J or K to fast forward pictures. Pictures can also be chosen by rotating the Multi selector command dial.
Step 4 Viewing and Deleting Pictures C Options Available in Playback Mode For details, see "More on Playback" (A101) or "Editing Pictures" (A118). C Pressing the c Button to Turn on the Camera When the camera is off, holding down the c button will turn the camera on in playback mode. The lens will not extend. C Viewing Pictures C Deleting the Last Picture Taken While in Shooting Mode In shooting mode, press the l button to delete the last picture shot.
Using the Flash In dark locations or when the subject is backlit, you can shoot pictures with flash by raising the built-in flash. You can set a flash mode that suits the shooting conditions. The flash has a range of about 0.5 to 10 m (1 ft. 8 in. to 32 ft.) for wide, and about 1.7 to 2.5 m (5 ft. 8 in. to 8 ft. 2 in.) for tele (when ISO sensitivity is set to Auto). U Auto Flash fires automatically when lighting is poor. V Basic Photography and Playback: A (Auto) Mode Reduces “red-eye” in portraits.
Using the Flash Setting the Flash Mode 1 Press the m (flash pop-up) button. The built-in flash will be raised. • When the built-in flash is lowered, the flash mode will be fixed to W (off ). Basic Photography and Playback: A (Auto) Mode 2 Press m (flash mode) on the multi selector. • The flash mode menu is displayed. 3 Press H or I on the multi selector to choose the desired mode and press the k button. • The icon for the selected flash mode is displayed at the top of the monitor.
Using the Flash B Shooting When Lighting is Poor and When the Flash is Disabled (W) • Use of a tripod is recommended to stabilize the camera during shooting and avoid the effects of camera shake. When the camera is stabilized with a tripod, set Vibration reduction (A160) to Off in the setup menu (A152). • The E indicator is displayed when the camera automatically increases sensitivity. Pictures taken when E is displayed may be slightly mottled.
Taking Pictures with the Self-Timer The self-timer is useful for taking pictures of yourself, such as in group souvenir shots, or if you want to reduce camera shake when you press the shutter-release button. You can select a two-second or ten-second timer. When using the self-timer, use of a tripod is recommended. When the camera is stabilized with a tripod, set Vibration reduction (A160) to Off in the setup menu (A152). 1 Press n (self-timer) on the multi selector. • The self-timer menu is displayed.
Using Focus Mode Choose a focus mode according to the subject and composition. A Autofocus Camera automatically adjusts focus according to distance to subject. Use when the distance from subject to lens is 50 cm (1 ft. 8 in.) or more, or 1.7 m (5 ft. 8 in.) or more when camera is zoomed all the way out. D Macro close-up Basic Photography and Playback: A (Auto) Mode Use for close-ups of flowers or small objects. The closest shooting distance will vary according to the magnification of the zoom.
Using Focus Mode Setting the Focus Mode 1 Press p (focus mode) on the multi selector. • The focus mode menu is displayed. Focus Press H or I on the multi selector to choose the desired focus mode and press the k button. • The mode selected for focus mode is displayed. • When A (autofocus) is applied, P is only displayed for a few seconds even if monitor indicators (A15) are turned on. • If a setting is not applied by pressing the k button within a few seconds, the selection will be cancelled.
Using Focus Mode Using Manual Focus Available when the shooting mode is A, B, C, D, M or d (sport continuous). Select a shooting mode with the mode dial (A42). 1 Press p (focus mode) on the multi selector to display the setup menu for focus mode. Basic Photography and Playback: A (Auto) Mode • Use the multi selector to choose E (manual focus) and press the k button. W is displayed at the top of the monitor. • The center of the picture will be enlarged and displayed on the screen.
Adjusting the Brightness (Exposure Compensation) Exposure compensation is used to alter the exposure from the value suggested by the camera to make pictures brighter or darker. 1 Press o (exposure compensation) on the multi selector. • The exposure compensation guide is displayed. • Exposure compensation is not available for D (manual) mode. Press H or I on the multi selector to choose the compensation and press the k button.
More on Shooting Selecting a Shooting Mode (Mode Dial) When the mode dial is rotated next to the mark, the camera switches to the corresponding shooting mode shown below. Auto mode More on Shooting A Auto mode (A26) A, B, C, D (A66) M User settings (A98) Choose this simple mode, an automatic, “point-andshoot” mode recommended for firsttime users of digital cameras. Choose these modes for greater control over shutter speed and aperture. Save the settings made in shooting modes A, B, C and D.
Shooting Suited for the Scene Shooting in the Scene Selected by the Camera (Scene Auto Selector) By simply framing a picture, the camera automatically selects the optimum scene mode for simpler shooting. When the camera is aimed at a subject in x scene auto selector mode, the camera automatically selects one of the following scene modes.
Shooting Suited for the Scene B Note on Scene Auto Selector Mode Depending upon shooting conditions, the camera may not select the desired scene mode. Should this occur, switch to A (Auto) mode (A26) or choose the desired scene mode manually (A45). C Focusing in Scene Auto Selector Mode • In scene auto selector mode, the camera detects and focuses on a face (see “Shooting with Face Priority” (A91) for more information).
Shooting Suited for the Scene Selecting Scenes for Shooting (Scene Mode) Camera settings are automatically optimized for the selected subject type. The following scene modes are available. b Portrait c Landscape e Night portrait f Party/indoor g Beach/snow h Sunset i Dusk/dawn j Night landscape k Close-up u Food l Museum m Fireworks show n Copy o Backlight D Backlit scene HDR p Panorama assist Setting the Scene Mode 1 Rotate the mode dial to y. More on Shooting • The camera enters scene mode.
Shooting Suited for the Scene Features The following icons are used for descriptions in this section: X= flash mode when the built-in flash is raised (A34); n=self-timer (A37); p= focus mode (A38); o=exposure compensation (A41). Q b Portrait Use this mode for taking portraits in which the main subject stands out clearly. • The camera automatically detects and focuses on a face (see “Shooting with Face Priority” (A91) for more information).
Shooting Suited for the Scene OQ e Night portrait Use this mode for portraits of a human subject shot in front of background lighting at night. Flash is used to illuminate the subject while maintaining the mood of the background. • Shoot pictures with the built-in flash raised. • The camera automatically detects and focuses on a face (see “Shooting with Face Priority” (A91) for more information). • If the camera detects multiple faces, the camera focuses on the face closest to the camera.
Shooting Suited for the Scene Q g Beach/snow Captures the brightness of such subjects as snowfields, beaches, or sunlit expanses of water. • The camera focuses on the subject in the center of the frame. U* X * n Off* p A o 0.0* o 0.0* o 0.0* Other settings can be selected. OQ h Sunset More on Shooting Preserves the deep hues seen in sunsets and sunrises. • The camera focuses on the subject in the center of the frame. X W* n Off* p A * Other settings can be selected.
Shooting Suited for the Scene Q j Night landscape X * W n Off* p B o 0.0* Other settings can be selected. More on Shooting This enables you to shoot night landscapes with the minimum of camera shake and noise. When the j icon at the top left of the screen glows green and the shutter-release button is pressed fully, pictures are shot continuously at high speed. The camera combines the shot pictures to save a single picture. • Camera focuses at infinity.
Shooting Suited for the Scene u Food Use this mode when taking pictures of food. • The focus mode (A38) setting will be changed to D (macro close-up) and the camera automatically zooms to the position at the closest distance at which the camera can focus. More on Shooting • The closest shooting distance will vary according to the magnification of the zoom.
Shooting Suited for the Scene OQ m Fireworks show Slow shutter speeds are used to capture the expanding burst of light from fireworks. • Camera focuses at infinity. When the shutter-release button is pressed halfway, the focus area or focus indicator (A8) always lights green; however, objects in the foreground may not always appear in focus. • Digital zoom is not available. • AF-assist illuminator (A163) does not light. X W n Off p B o 0.0 o 0.01 o 0.
Shooting Suited for the Scene D Backlit scene HDR More on Shooting Suitable for shooting landscapes with a large contrast between light and dark. When the shutter-release button is pressed fully, the pictures that were shot continuously at high speed are overlaid, and the following two frames are saved: - The picture processed with Active D-Lighting (A95) - The picture obtained from HDR (High Dynamic Range) overlay • The second frame of the recorded pictures will be the one obtained from HDR overlay.
Shooting Suited for the Scene Taking Pictures for a Panorama The camera focuses on the subject in the center of the frame. Use a tripod for best results. When the camera is stabilized with a tripod, set Vibration reduction (A160) to Off in the setup menu (A152). 1 Use the multi selector to choose p Panorama assist from the scene menu and press the k button (A45). • The I icon is displayed to show the direction in which pictures will be joined.
Shooting Suited for the Scene 5 Press the k button when shooting is completed. • The camera returns to step 2. End 14 More on Shooting B Panorama Assist • Set flash mode, self-timer, focus mode and exposure compensation before taking the first picture. They cannot be changed after the first picture is taken. Pictures cannot be deleted, nor can zoom, Image quality (A75) or Image size settings (A76) be adjusted after the first picture is taken.
Taking Pictures of Smiling Faces (Smart Portrait Mode) In the default setting, the camera detects smiling faces using face priority and releases the shutter automatically (smile timer function). The skin softening function makes a human subject’s skin appear smoother. 1 Rotate the mode dial to F (smart portrait). • The camera enters smart portrait mode. Frame the picture. • Point the camera at the subject.
Taking Pictures of Smiling Faces (Smart Portrait Mode) 4 Finish shooting. • To finish automatic shooting of smiling faces, either turn the camera off, set Smile timer to Off, or rotate the mode dial to select another shooting mode. More on Shooting B Notes on Smart Portrait Mode • Digital zoom is not available. • Under some shooting conditions, faces and smiling faces may not be detected properly. • See “Notes on Face Priority” (A92) for more information.
Taking Pictures of Smiling Faces (Smart Portrait Mode) Smart Portrait Menu Press the d button (A13) to display the smart portrait menu and use the multi selector (A12) to modify and apply settings. The following options are available. Switch to the F tab when the smart portrait menu is not displayed (A13). • Smile timer and Blink proof cannot be used simultaneously. Image quality Image quality (A75) settings can be changed.
Taking Pictures of Smiling Faces (Smart Portrait Mode) Blink proof More on Shooting 58 When set to On, the shutter is released five times as the shutter-release button is fully pressed once; the camera chooses one image in which the subjects' eyes are open, and saves it. • The message on the right will be displayed for a few seconds when the camera records an image in which someone may have been blinking. A blink was detected in the picture just taken.
Focusing on a Moving Subject in Subject Tracking Mode Use this mode to shoot moving subjects. Subject tracking begins once you select a subject to be focused on, and the focus area will move and follow the subject. 1 Rotate the mode dial to s (subject tracking). • The camera enters subject tracking mode, and a white border is displayed in the center of the frame. 2 Select a subject. 3 Start More on Shooting • Frame the subject in the center of the border, and press the k button.
Focusing on a Moving Subject in Subject Tracking Mode B More on Shooting 60 Subject Tracking Mode • Digital zoom is not available. • Set the zoom position, flash mode, exposure compensation, and menu before registering a subject. If any of these are changed after a subject is registered, the subject will be canceled.
Focusing on a Moving Subject in Subject Tracking Mode Subject Tracking Menu Press the d button (A13) to display the subject tracking menu and use the multi selector (A12) to modify and apply settings. The following options are available. Switch to the s tab when the subject tracking menu is not displayed (A13). Image quality Image quality (A75) settings can be changed. Changes made to the image quality setting apply to all shooting modes (except for sport continuous mode and shooting mode M).
Shooting with a High-Speed Burst (Sport Continuous Mode) Sport continuous mode allows the split-second movements of high-speed moving subjects to be captured through continuous shooting. • The image size is fixed to B 1600×1200 or A 1280×960 (A64). • The ISO sensitivity is set automatically within the range of ISO 160 to 3200. • The focus, exposure, and white balance settings are fixed at the values for the first picture in each series. 1 Rotate the mode dial to d (sport continuous).
Shooting with a High-Speed Burst (Sport Continuous Mode) B Notes on Sport Continuous Shooting • A longer period of time may be required before the recording is complete. The time taken until recording ends may vary, depending upon the amount of frames taken, image quality setting and the write speed of the memory card used. • If the ISO sensitivity is raised for shooting, the shot pictures may be grainy. • In clear sunlight, the correct exposure may not be obtained (overexposure).
Shooting with a High-Speed Burst (Sport Continuous Mode) Sport Continuous Menu Press the d button (A13) to display the sport continuous menu, and then use the multi selector (A12) to change the settings. The following options are available. Switch to the d tab when the sport continuous menu is not displayed (A13). • High-speed mode and Pre-shooting cache cannot be set simultaneously. High-speed mode Choose the sport continuous shooting type.
Shooting with a High-Speed Burst (Sport Continuous Mode) C Pre-shooting Cache When pre-shooting cache is set to On, shooting starts when the shutter-release button is pressed down halfway for 0.5 seconds or more, and images that were shot just before the shutter-release button is pressed down fully can be saved as part of the continuously shot frames. Up to five frames can be recorded in the pre-shooting cache. When pre-shooting cache is enabled, the current setting is displayed during shooting (A8).
Setting the Exposure for Shooting (A, B, C, D Modes) A, B, C, D Modes By rotating the mode dial, you can shoot pictures in the following four exposure modes: A (programmed auto), B (shutter-priority auto), C (aperture-priority auto), and D (manual). In addition to allowing you to set the shutter speed and aperture yourself, these modes offer control over a variety of advanced settings such as changing the ISO sensitivity and white balance in the shooting menu (A73).
Setting the Exposure for Shooting (A, B, C, D Modes) D Shutter Speed and Aperture The same exposure can be achieved with different combinations of shutter speed and aperture, allowing you to freeze or blur motion and control depth of field. The following figure shows how shutter speed and aperture affect exposure. When the ISO sensitivity setting (A84) is changed, the range of shutter speeds and aperture values at which the correct exposure can be obtained also changes. 1/250 Shutter speed F5.
Setting the Exposure for Shooting (A, B, C, D Modes) A (Programmed Auto) Mode Shoot pictures with shutter speed and aperture value set automatically by the camera. 1 More on Shooting 2 Rotate the mode dial to A. 1/250 F5.6 17 1/500 F4.0 17 Frame the subject and shoot. • At the default setting, the camera automatically selects the focus area (one of nine) containing the subject closest to the camera.
Setting the Exposure for Shooting (A, B, C, D Modes) B (Shutter-Priority Auto) Mode Set the shutter speed and shoot pictures. Rotate the mode dial to B. 2 Rotate the command dial to choose the shutter speed value between 1/2000 second and eight seconds. 1/250 3 F5.6 17 More on Shooting 1 Focus and shoot. • At the default setting, the camera automatically selects the focus area (one of nine) containing the subject closest to the camera.
Setting the Exposure for Shooting (A, B, C, D Modes) C (Aperture-Priority Auto) Mode Set the aperture value and shoot pictures. Rotate the mode dial to C. 2 Rotate the command dial to choose the aperture value (f/-number). More on Shooting 1 • When the camera is zoomed all the way out, aperture can be set to values between f/2.8 and f/8.0; at maximum zoom, aperture can be set to values between f/5.0 and f/ 8.0. 3 1/250 F5.6 17 Focus and shoot.
Setting the Exposure for Shooting (A, B, C, D Modes) D (Manual) Mode Set the shutter speed and aperture value, and shoot pictures. Rotate the mode dial to D. 2 Press the multi selector K to activate the shutter speed setting. • The active setting switches between shutter speed and aperture each time the multi selector K is pressed. • At shutter speeds of 1/4 second or slower, the shutter speed indicator turns red (A69).
Setting the Exposure for Shooting (A, B, C, D Modes) 5 Rotate the command dial to choose an aperture value. • Repeat steps 2 to 5 to modify shutter speed and aperture settings until the desired exposure is achieved. 1/125 6 F8.0 17 Focus and shoot. More on Shooting • At the default setting, the camera automatically selects the focus area (one of nine) containing the subject closest to the camera.
Shooting Options: Shooting Menu (A, B, C, D Modes) While shooting in A, B, C, D and M (A98), the shooting menu contains the following options. q Image quality A75 Choose the image quality (compression ratio) of recorded pictures. This can also be set in the menus of another shooting mode. r Image size A76 Choose the image size of recorded pictures. This can also be set in the menus of another shooting mode (except for sport continuous mode).
Shooting Options: Shooting Menu (A, B, C, D Modes) u A99 Save user settings Save the current edited settings into the mode dial M. u A100 Reset user settings Reset the saved settings in M back to the default settings. Displaying the Shooting Menu Choose A (Programmed auto), B (Shutter-priority auto), C (Aperture-priority auto), D (Manual) or M (User settings) by rotating the mode dial. Press the d button and switch to the A, B, C, D or M tab to display the shooting menu (A13).
Shooting Options: Shooting Menu (A, B, C, D Modes) q Image Quality Set to A, B, C or D M d M A, B, C, D (shooting menu) (A74) M Image quality Choose the amount of compression applied to pictures. Lower compression ratios result in higher quality pictures, but also larger file sizes, limiting the number of pictures that can be recorded. a Fine Fine quality images (compression ratio of 1: 4), suitable for enlargement or high quality prints.
Shooting Options: Shooting Menu (A, B, C, D Modes) r Image Size Set to A, B, C or D M d M A, B, C, D (shooting menu) (A74) M Image size Choose the size of pictures in pixels for recording. Pictures shot at smaller sizes require less memory, making them suited to distribution by e-mail or the web. Conversely, the larger the image, the larger the size at which it can be printed or displayed without becoming noticeably “grainy,” limiting the number of pictures that can be recorded.
Shooting Options: Shooting Menu (A, B, C, D Modes) C Number of Exposures Remaining The following table lists the approximate number of pictures that can be stored in internal memory and on a 4 GB memory card, at each combination of Image size (A76) and Image quality (A75) settings. Note that the number of images that can be stored will differ depending on the composition of the image (due to JPEG compression).
Shooting Options: Shooting Menu (A, B, C, D Modes) 1 If the number of exposures remaining is 10,000 or more, the number of exposures remaining display shows “9999”. 2 Print size at an output resolution of 300 dpi. Print sizes are calculated by dividing the number of pixels by printer resolution (dpi) and multiplying by 2.54 cm (1 in.).
Shooting Options: Shooting Menu (A, B, C, D Modes) F Optimize Image Set to A, B, C or D M d M A, B, C, D (shooting menu) (A74) M Optimize image Change the settings for optimizing images according to the shooting scene or your preferences. Contrast, saturation, sharpening, and other settings can be adjusted in detail. g Normal (default setting) Standard image optimization; recommended in most situations. h Softer o Vivid Enhances saturation and produces vibrant reds and greens.
Shooting Options: Shooting Menu (A, B, C, D Modes) Customizing Image Enhancement Options: Custom Select Custom to make separate adjustments to the following options. Custom Contrast Image sharpening Saturation Contrast More on Shooting Control contrast. Lower settings prevent loss of detail in highlights under harsh lighting or in direct sunlight. Higher settings preserve detail in misty landscapes and other low-contrast subjects. The default setting is Auto.
Shooting Options: Shooting Menu (A, B, C, D Modes) Shooting in Black-and-White When Black-and-white is selected, the options Black-and-white described below are available. Standard Custom • Choose Standard to shoot in basic black-and-white. • Choose Custom to manually adjust Contrast, B&W + color Image sharpening, and Monochrome filter effects. • When the B&W + color option is enabled (w), one black-and-white picture and the same picture in full color are recorded simultaneously.
Shooting Options: Shooting Menu (A, B, C, D Modes) B White Balance Set to A, B, C or D M d M A, B, C, D (shooting menu) (A74) M White balance The color of light reflected from an object varies with the color of the light source. The human brain is able to adapt to changes in the color of the light source, with the result that white objects appear white whether seen in the shade, direct sunlight, or under incandescent lighting.
Shooting Options: Shooting Menu (A, B, C, D Modes) Preset Manual Preset manual is used under unusual lighting conditions or when the desired effect has not been achieved with white balance settings like Auto and Incandescent (for example, to make images shot under a lamp with a red shade look as though they had been shot under white light). 1 Place a white or gray reference object under the lighting that will be used during shooting.
Shooting Options: Shooting Menu (A, B, C, D Modes) E ISO Sensitivity Set to A, B, C or D M d M A, B, C, D (shooting menu) (A74) M ISO sensitivity Sensitivity is a measure of how quickly the camera reacts to light. The higher the sensitivity, the less light needed to make an exposure.
Shooting Options: Shooting Menu (A, B, C, D Modes) G Metering Set to A, B, C or D M d M A, B, C, D (shooting menu) (A74) M Metering The process of measuring the brightness of the subject to determine the exposure is known as Metering. Choose how the camera meters exposure. G Matrix (default setting) Camera sets exposure for entire frame. Recommended in most situations. q Center-weighted r Spot Camera meters area shown by circle in center of frame.
Shooting Options: Shooting Menu (A, B, C, D Modes) C Continuous Set to A, B, C or D M d M A, B, C, D (shooting menu) (A74) M Continuous Change settings for Continuous (continuous shooting) and BSS (Best Shot Selector), etc. U Single (default setting) One image is shot each time the shutter-release button is pressed.
Shooting Options: Shooting Menu (A, B, C, D Modes) B Notes on Continuous Shooting • When Continuous H, Continuous L, BSS or Multi-shot 16 is selected, the flash will be set to off. Focus, exposure and white balance are fixed at the values for the first picture in each series. • The frame rate may become slower depending on the image quality, image size, memory card type or shooting conditions. • This feature cannot be used simultaneously with certain features.
Shooting Options: Shooting Menu (A, B, C, D Modes) 2 Choose the interval taken between each shot and press the k button. • The maximum amount of frames that can be taken during interval timer shooting differs according to the interval taken between each shot. - 30 s: 600 images - 1 min: 300 images - 5 min: 60 images - 10 min: 30 images 3 Intvl timer shooting 30 s 1 min 5 min 10 min Press the d button. More on Shooting • The camera returns to shooting mode.
Shooting Options: Shooting Menu (A, B, C, D Modes) H Auto Bracketing Set to A, B, C or D M d M A, B, C, D (shooting menu) (A74) M Auto bracketing The camera automatically varies exposure slightly over a burst of pictures. Use in situations where it is difficult to perform exposure compensation (A41). ±0.3 X Camera varies exposure by 0 EV, +0.3 EV, and –0.3 EV over next three shots. The three shots are taken in sequence when the shutter-release button is fully pressed. ±0.7 Y ±1.
Shooting Options: Shooting Menu (A, B, C, D Modes) G AF-Area Mode Set to A, B, C or D M d M A, B, C, D (shooting menu) (A74) M AF area mode Choose how the focus area is determined for autofocus. When digital zoom is in effect, the camera will focus on the subject in the center focus area regardless of the applied AF area mode option. a Face priority More on Shooting The camera automatically detects and focuses on a face (see “Shooting with Face Priority” (A91) for more information).
Shooting Options: Shooting Menu (A, B, C, D Modes) y Center Camera focuses on the subject in the center of the frame. Center focus area is always used. 1/250 F5.6 17 Focus area D More Information • See “Autofocus” (A31) for more information. • See “Functions that Cannot be Applied Simultaneously” (A96) for more information. More on Shooting Shooting with Face Priority The camera automatically detects and focuses on a face. The face priority function will be enabled for the following situations.
Shooting Options: Shooting Menu (A, B, C, D Modes) 2 Press the shutter-release button halfway. • The camera focuses on the face framed by the double border. The double border will glow green and focus will be locked. • When the camera is unable to focus on a face, the double border will blink. Press the shutter-release 17 1/250 F5.6 button halfway again and focus. • Press the shutter-release button all the way down to shoot.
Shooting Options: Shooting Menu (A, B, C, D Modes) I Autofocus Mode Set to A, B, C or D M d M A, B, C, D (shooting menu) (A74) M Autofocus mode Choose how the camera focuses. A Single AF (default setting) Camera focuses when the shutter-release button is pressed halfway. B Full-time AF Camera focuses continuously until the shutter-release button is pressed down halfway. Use with moving subjects. A sound will be heard while the camera focuses.
Shooting Options: Shooting Menu (A, B, C, D Modes) M Noise Reduction Set to A, B, C or D M d M A, B, C, D (shooting menu) (A74) M Noise reduction At slow shutter speeds, pictures may be affected by “noise” in the form of randomlyspaced, brightly-colored dots concentrated in dark parts of the image. Use this option to reduce noise at slow shutter speeds. Enabling noise reduction increases the time needed to record pictures after they are shot.
Shooting Options: Shooting Menu (A, B, C, D Modes) J Active D-Lighting Set to A, B, C or D M d M A, B, C, D (shooting menu) (A74) M Active D-Lighting “Active D-Lighting” preserves details in highlights and shadows, creating photographs with natural contrast. The image taken will reproduce the contrast effect that is seen with the naked eye. This is particularly effective for shooting brightly lit outdoor scenery from darker indoors or taking pictures of shaded subjects at a sunny seaside.
Shooting Options: Shooting Menu (A, B, C, D Modes) Functions that Cannot be Applied Simultaneously Certain settings in the shooting menu cannot be used with other functions. Restricted function Flash mode Setting Description Focus mode (A38) When B (infinity) is selected for shooting, the flash is not available. Continuous (A86) When Continuous H, Continuous L, BSS or Multishot 16 is selected for shooting, the flash is not available. Auto bracketing (A89) The flash is not available.
Shooting Options: Shooting Menu (A, B, C, D Modes) Restricted function Continuous/Auto bracketing Setting Description Optimize image (A79) When Black-and-white is selected and B&W + color is enabled in Optimize image, then Continuous H, Continuous L, BSS, Multi-shot 16 and Auto bracketing are not available. When the B&W + color check box is selected, the setting for continuous is reset to Single and Auto bracketing is reset to Off.
Using M (User Setting Mode) Settings that are frequently used for A, B, C and D shooting modes can be saved in mode dial M. Rotating the mode dial to M enables you to shoot using the saved settings. The following settings can be saved in M.
Using M (User Setting Mode) Save the Settings in M 1 Rotate the mode dial to the desired exposure mode. • Rotate to A, B, C or D. • Settings can be saved even if rotated to M (the default settings of shooting mode A are saved when the camera is first purchased). Change to a frequently used setting. Press the d button. More on Shooting 2 3 • The shooting menu is displayed. • Switch to the A, B, C, D or M tab when the shooting menu is not displayed (A13).
Using M (User Setting Mode) Resetting Saved Settings The saved setting will revert back to the default setting of shooting mode A. 1 2 More on Shooting 100 Choose Reset user settings in the shooting menu screen and press the k button. Choose Yes and press the k button. • The saved settings have been reset. Shooting menu Save user settings Reset user settings Reset user settings User settings will be reset to default values.
More on Playback Operations in Full-Frame Playback In shooting mode, press the c (playback) button to enter playback mode and play back the images that have been shot (A32). In full-frame playback, the following operations are available. 15/05/2010 15:30 0004.
Operations in Full-Frame Playback Viewing Continuously Shot Pictures (Pictures in a sequence) Pictures that were shot continuously in the following modes are saved as a “sequence” for each shooting. • Continuous H or Continuous L for the Continuous (A86) • Auto bracketing (A89) • Sport continuous mode (A62) In the full-frame playback or thumbnail display (A104), 15/05/2010 15:30 the first frame of a sequence is displayed as the representative key picture.
Operations in Full-Frame Playback Deleting Pictures in a Sequence • Press the l button while the key picture is displayed to delete all the pictures in the sequence that is displayed. • Press the l button while sequence playback is paused Delete to select the deletion method. - Erase current picture: Delete only the frame that is displayed (A32). Erase current picture - Erase selected images: Select pictures for deletion Erase selected images Erase entire sequence (A111).
Viewing Multiple Pictures: Thumbnail Playback Rotate the zoom control to f (h) in full-frame playback mode (A32, 101) to display pictures as thumbnail images in thumbnail playback mode. 1/ 10 The following operations can be performed in thumbnail playback. To Use Description A Press H, I, J or K on the multi selector. 12 Rotate the command dial.
Viewing Multiple Pictures: Thumbnail Playback C Icons on the Thumbnails Print-set icon When pictures marked using Print set (A108) or Protect (A113) are selected, the icons shown at right are displayed. When Sequence (A102) is selected in thumbnail playback mode, the icons shown on the right are displayed. Movies are displayed as film frames.
Taking a Closer Look: Playback Zoom Rotating the zoom control to g (i) during full-frame playback mode (A32) zooms in on the current picture, enlarging and displaying the center of the picture on the monitor. • The guide at lower right shows which portion is enlarged. The following operations can be performed while pictures are zoomed in.
Playback Options: Playback Menu The following options are available in playback menu. k I e a b c d i g h j C C More on Playback f Quick retouch A120 Easily create retouched images in which contrast and saturation have been enhanced. D-Lighting A121 Enhance brightness and contrast in dark portions of pictures. Skin softening A122 Make the subject’s skin appear smoother. Print set A108 Select pictures to print and the number of copies for each.
Playback Options: Playback Menu a Print Set: Setting the Pictures and Number of Copies to Print Press the d button M c (Playback menu) (A107) M a Print set If you choose to use one of the following methods to print pictures that are recorded on a memory card, the pictures to print and the number of copies can be set in advance on the memory card. • Printing with a DPOF-compatible (A198) printer that is equipped with a card slot. • Ordering the prints from a digital photo lab that has a DPOF service.
Playback Options: Playback Menu 3 Choose whether or not to also print shooting date and photo information. • Choose Date and press the k button to print the date of recording on all pictures in the print order. • Choose Info and press the k button to print shooting information (shutter speed and aperture) on all pictures in the print order. • Choose Done and press the k button to complete the print order. Pictures selected for printing are recognized by the w icon displayed with playback.
Playback Options: Playback Menu b Slide Show Press the d button M c (Playback menu) (A107) M b Slide show View pictures stored in the internal memory or on a memory card in an automatic slide show. 1 Use the multi selector to choose Start and press the k button. Slide show Pause • To change the interval between pictures, choose Frame intvl, select the desired interval time, and press Start the k button before choosing Start.
Playback Options: Playback Menu c Delete: Deleting Multiple Pictures Press the d button M c (Playback menu) (A107) M c Delete Delete a picture. Multiple pictures can also be deleted. Erase selected images In the picture selection screen, choose the pictures for deletion. See "Selecting Pictures" (A112) for more information. • When a sequence (A102) that is set to display the key picture only is chosen, all pictures in the sequence that is displayed are deleted.
Playback Options: Playback Menu Selecting Pictures More on Playback The picture selection screen, as shown at right, will be Erase selected images displayed with the following menus: • Playback menu: Quick retouch* (A120) , D-Lighting* (A121) , Skin softening* (A122), Select images in Print set Back (A108), Erase selected images in Delete (A111), Protect (A113), Rotate image (A114), Hide image (A114), Small picture* (A124), Selected images in Copy (A115), Black border* (A125), Choose key picture (A116) •
Playback Options: Playback Menu 2 Press H or I to select ON or OFF (or the number of copies). Erase selected images • When ON is selected, a check mark is displayed in the current picture. Repeat steps 1 and 2 to select additional pictures. Back 3 Press the k button to apply picture selection. • With selections such as Erase selected images, the confirmation dialog is displayed. Follow the instructions on the screen. d Protect Protect selected pictures from accidental deletion.
Playback Options: Playback Menu f Rotate Image Press the d button M c (Playback menu) (A107) M f Rotate image Change the orientation of pictures played back in the camera’s monitor after shooting. Pictures can be rotated 90° clockwise or counterclockwise. Pictures that were recorded in the portrait (vertical) orientation can be rotated up to 180° in either direction. Select a picture in the picture selection screen (A112), and press the k button to display the rotate image screen.
Playback Options: Playback Menu h Copy: Copying Between the Internal Memory and Memory Card Press the d button M c (Playback menu) (A107) M h Copy Copy pictures between the internal memory and a memory card. 1 Use the multi selector to select an option from the copy screen and press the k button. Copy • q: Copy pictures from internal memory to memory card. • r: Copy pictures from memory card to internal memory. 2 Select a copy option and press the k button.
Playback Options: Playback Menu C Memory contains no images. Message If there are no pictures stored on the memory card when playback mode is applied, the message, Memory contains no images., will be displayed. Press the d button to display the copy option screen, and copy the pictures stored in the camera’s internal memory to the memory card. D More Information See “File and Folder Names” (A181) for more information.
Voice Memos: Recording and Playback Use the camera’s built-in microphone to record voice memos for pictures marked with n in full-frame playback mode (A32). 15/05/2010 15:30 0004.JPG Recording Voice Memos 4 A voice memo, up to 20 seconds in length, will be recorded while the k button is pressed down. • Do not touch the built-in microphone during recording. • During recording, o and p blink in the monitor. 4 17 Press the k button while a picture is 15/05/2010 15:30 0004.
Editing Pictures Picture Editing Functions Use this camera to edit pictures in-camera and store them as separate files (A181). Editing function Application Quick retouch (A120) Easily create a copy with enhanced contrast and richer colors. D-Lighting (A121) Create a copy of the current picture with enhanced brightness and contrast, brightening dark portions of the picture. Skin softening (A122) Make the subject’s skin appear smoother.
Picture Editing Functions C Restrictions on Picture Editing The following limitations apply when editing pictures that were created by editing. Copies Created By: Can Be Edited By: Quick retouch D-Lighting Skin softening, small picture, or crop can be used. Quick retouch and D-Lighting cannot be used together. Skin softening Quick retouch, D-Lighting, small picture, or crop can be used. Small picture Crop No additional editing functions can be used.
Editing Pictures k Quick Retouch: Enhancing Contrast and Saturation Easily create retouched images in which contrast and saturation have been enhanced. Retouched copies are stored as separate files. 1 Choose the desired picture from full-frame (A32) or thumbnail (A104) playback mode and press the d button. • The playback menu is displayed. • Switch to the c tab when the playback menu is not displayed (A13). 2 Use the multi selector to choose k Quick retouch and press the k button.
Editing Pictures I D-Lighting: Enhancing Brightness and Contrast D-Lighting can be used to create copies with enhanced brightness and contrast, brightening dark portions of a picture. Enhanced copies are stored as separate files. 1 Choose the desired picture from full-frame (A32) or thumbnail (A104) playback mode and press the d button. • The playback menu is displayed. • Switch to the c tab when the playback menu is not displayed (A13).
Editing Pictures e Skin Softening: Making Skin Appear Smoother Skin softening can be applied to faces that are detected in pictures already taken, to make skin appear smoother. Pictures edited with this function are stored as separate files. 1 Choose the desired picture from full-frame (A32) or thumbnail (A104) playback mode and press the d button. • The playback menu is displayed. • Switch to the c tab when the playback menu is not displayed (A13).
Editing Pictures 4 Confirm the results. • Up to 12 faces, in order of proximity to the center of the frame, can be enhanced. • When multiple faces are edited using skin softening, use the multi selector J and K to switch the face that is displayed. • To adjust the extent of skin softening, press the d button and return to step 3. • Press the k button to create a copy edited with skin softening. • Copies created by editing with skin softening can be recognized by the E icon displayed during playback.
Editing Pictures g Small Picture: Resizing Pictures Create a small copy of the current picture. Suitable for displaying on web pages or sending as e-mail attachments. The available size is l 640×480, m 320×240 or n 160×120. Small copies are stored as separate files with a compression ratio of 1:16. 1 Choose the desired picture from full-frame (A32) or thumbnail (A104) playback mode and press the d button. • The playback menu is displayed.
Editing Pictures j Black Border: Adding a Black Border to a Picture This function creates copies with Thin, Medium, or Broad black lines, along borders of pictures. The created picture is stored as a separate file. 1 Choose the desired picture from full-frame (A32) or thumbnail (A104) playback mode and press the d button. • The playback menu is displayed. • Switch to the c tab when the playback menu is not displayed (A13). 2 Use the multi selector to choose j Black border and press the k button.
Editing Pictures a Crop: Cutting Out Part of a Picture Create a copy containing only the portion visible in the monitor when u is displayed with playback zoom (A106) enabled. Cropped copies are stored as separate files. 1 Enlarge the desired picture during full-frame display (A32) by rotating the zoom control to the g (i) direction. • To crop a picture displayed in "tall" (portrait) orientation, zoom in on the picture until the black bars displayed on the both sides of the monitor disappear.
Movie Recording and Playback Recording Movies You can shoot high-definition movies with sound. • Regardless of the remaining memory on the memory card, the maximum length for a single movie is 29 minutes. 1 Turn on the camera and display the shooting screen. Movie options • Movies can be recorded in any shooting mode (A42). • The movie options show the type of movie that will be shot. The default setting is U HD 1080pP (1920×1080) (A133). 1/250 2 F5.6 17 Rotate the movie mode switch to HD.
Recording Movies B Notes on Movie Recording • When recording a movie onto a memory card, a memory card with an SD speed class of Class 6 or higher is recommended (A180). If the transfer speed of the card is slow, the movie recording may end unexpectedly. • When recording movies, the angle of view (recorded range) is smaller than that of still pictures. • Using a digital zoom causes image quality to deteriorate.
Recording Movies C Functions Available in Movie Recording • Movies are recorded with the same hue adjustment as A (auto mode) in any shooting mode (A42). Settings such as the hue adjustment in scene mode and Optimize image or White balance in the shooting menu (A73) are not applied to movies. • When the shooting mode is A, B, C, D or M, the Metering (A85) setting is also applied to the movie recording (except for Spot AF area).
Recording Movies Recording Slow Motion Movies or Fast Motion Movies (HS Movie) After the movie mode switch is rotated to HS and movie recording is started, when the k button is pressed during recording, the mode switches to high speed (HS) recording (HS movie recording). The section that is shot as an HS movie can be played in slow motion from 1/8 to 1/2 the speed of normal playback, or it can be played speeded up to twice the normal speed. 1 Turn on the camera and rotate the movie mode switch to HS.
Recording Movies B Notes on HS Movie • Sound is not recorded for the section shot for slow motion or speeded up playback. • The vibration reduction function is not available during movie recording while the movie mode switch is rotated to HS. The zoom position, focus, exposure and white balance are fixed when the b (movie-record) button is pressed to start movie recording.
Recording Movies Movie Menu The options below can be set in the movie menu. D A133 Movie options Options can be selected for the movie that is shot when the movie mode switch is rotated to HD. D A134 HS movie options Options can be selected for the movie that is shot when the movie mode switch is rotated to HS. I A135 Autofocus mode Choose how the camera focuses when recording movies with the movie mode switch rotated to HD.
Recording Movies D Movie Options Press d button M D (Movie menu) (A132) M Movie options Options can be selected for the movie that is shot when the movie mode switch is rotated to HD. The higher the resolution and bitrate, the higher the picture quality; but the file size also becomes larger. Option Description Movies with an aspect ratio of 16:9 are recorded in full highdefinition. This option is suited to playback on a wide screen U HD 1080pP(1920×1080) TV that is compatible with full high-definition.
Recording Movies D HS Movie Options Press d button M D (Movie menu) (A132) M HS movie options Options can be selected for the movie that is shot when the movie mode switch is rotated to HS. Option Description Movie Recording and Playback 240 fps (default setting) Slow motion movies with an aspect ratio of 4:3 are recorded at 1/8 the speed of a normal movie.
Recording Movies C Maximum Movie Length Internal memory (43MB) Option U HD 1080pP(1920×1080) (default setting) V HD 1080p (1920×1080) x HD 720p (1280×720) Memory card (4GB)* 23 s 34 min 26 s 39 min 25 s 34 s 50 min y VGA (640×480) 1 min 37 s 2 h 5 min z QVGA (320×240) 4 min 34 s 4 h 45 min All figures are approximate. The maximum recording time may vary by make of memory card and the bitrates at which the movie was recorded. * The maximum recording time for a single movie is 29 minutes.
Recording Movies w Electronic VR Press d button M D (Movie menu) (A132) M Electronic VR Enable or disable electronic VR when recording movies with the movie mode switch rotated to HD. Option Description On (default setting) Reduces the effects of camera shake in movie modes. Off Electronic VR is not enabled. When the electronic VR is set to On, R is displayed on the screen when movie recording starts (A8). B Note on Electronic VR Electronic VR is not available when recording HS movies.
Movie Playback In full-frame playback mode (A32), movies are recognized by the movie options icon (A133). To play a movie, display it in full-frame playback mode and press the k button. 15/05/2010 15:30 0010.MOV 20s Use the zoom control g or f during playback to adjust the volume. Playback controls appear at the top of the monitor. Press the multi selector J or K to choose a playback control, then press the k button to perform the selected operation. The following operations are available.
Connecting to Televisions, Computers and Printers Connecting to a TV Connect the camera to a television to play back pictures on the television. If your television is equipped with an HDMI connector, you can connect it to the camera with an HDMI cable to enjoy recorded movies in the high-definition quality. Connecting to Televisions, Computers and Printers 1 Turn off the camera. 2 Connect the camera to the TV.
Connecting to a TV 3 Tune the television to the video channel. • See the documentation provided with your television for details. 4 Hold down the c button to turn on the camera. B Connecting to Televisions, Computers and Printers • The camera enters playback mode, and pictures recorded to the internal memory, or memory card, will be displayed on the television. • While the camera is connected to the TV, the monitor will remain off. Notes on Connecting an HDMI Cable • An HDMI cable is not supplied.
Connecting to a Computer Use the supplied USB cable to connect the camera to a computer, and copy (transfer) pictures to a computer with the supplied Nikon Transfer software. Before Connecting the Camera Connecting to Televisions, Computers and Printers Install the Software Before connecting the camera to a computer, software, including Nikon Transfer, ViewNX for displaying transferred pictures, and Panorama Maker for creating panorama photos, must be installed using the supplied Software Suite CD.
Connecting to a Computer Transferring Pictures from a Camera to a Computer Start the computer to which Nikon Transfer was installed. Be sure that the camera is off. Connect the camera to the computer using the supplied USB cable. • The camera turns on automatically and the power-on lamp glows or blinks (A145). The camera monitor will remain off. B Connecting to Televisions, Computers and Printers 1 2 3 Connecting the USB Cable • Be sure that connectors are properly oriented.
Connecting to a Computer 4 Connecting to Televisions, Computers and Printers 142 Start Nikon Transfer installed on the computer. • Windows 7 When the Devices and Printers K P100 screen is displayed, click Change program under Import pictures and videos. Select Copy pictures to a folder on my computer in the Change program dialog and click OK. Double-click Copy pictures to a folder on my computer on the Devices and Printers K P100 screen.
Connecting to a Computer 5 Confirm that the source device is displayed in the transfer options Source panel and click Start Transfer. P100 Start Transfer button Source device At the Nikon Transfer default settings, all pictures are transferred to the computer. At the Nikon Transfer default settings, ViewNX starts automatically when transfer is complete and transferred pictures can be viewed.
Connecting to a Computer D Using a Card Reader Connecting to Televisions, Computers and Printers The pictures stored on the memory card inserted into a card reader or similar device can also be transferred to the computer using Nikon Transfer. • If the memory card capacity is 2 GB or more, or if the memory card is SDHC-compliant, the card reader or similar device must support these memory card specifications.
Connecting to a Computer Charging While Connecting to a Computer Power-on Lamp The following chart explains power-on lamp status when the camera is connected to a computer. Status Slow blinking (orange) Glows (green) Description Battery charging. Battery not charging. Charging is complete when the power-on lamp stops blinking orange and glows green. Flickers (orange) • Operating temperature range exceeded. Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to 95°F) before use.
Connecting to a Printer Users of PictBridge-compatible (A198) printers can connect the camera directly to the printer and print pictures without using a computer. The steps for printing are as follows.
Connecting to a Printer Connecting the Camera and Printer Turn off the camera. 2 Turn on the printer. • Check printer settings. 3 Connect the camera to the printer using the supplied USB cable. 4 The camera turns on automatically. Connecting to Televisions, Computers and Printers 1 • When connected correctly, the PictBridge startup screen (1) will be displayed in the camera monitor. Then the Print selection screen (2) will be displayed. 1 2 Print selection 15/05 2010 NO.
Connecting to a Printer D More Information See “Printing Images of Size 1:1” (A78) for more information. Printing Pictures One at a Time Connecting to Televisions, Computers and Printers After connecting the camera to the printer correctly (A147), print pictures by following the procedure below. 1 Use the multi selector to choose the picture to be printed and press the k button. Print selection 15/05 2010 • Pictures can also be chosen by rotating the command dial.
Connecting to a Printer 5 Choose the desired paper size and press the k button. • To specify paper size using printer settings, choose Default in the paper size menu. Choose Start print and press the k button. Default 3.5×5 in. 5×7 in. 100×150 mm 4×6 in. 8×10 in. Letter PictBridge Start print Copies Paper size 7 Printing starts. • Monitor display returns to that shown in step 1 when printing is complete. • To cancel before all copies have been printed, press the k button.
Connecting to a Printer 3 Choose the desired paper size and press the k button. • To specify paper size using printer settings, choose Default in the paper size menu. Connecting to Televisions, Computers and Printers 4 Choose Print selection, Print all images or DPOF printing and press the k button. Paper size Default 3.5×5 in. 5×7 in. 100×150 mm 4×6 in. 8×10 in.
Connecting to a Printer Print all images Print all images 018 prints Start print Cancel DPOF printing Print pictures for which a print order was created in Print set option (A108). • The menu shown at right will be displayed. To print, choose Start print and press the k button. • Choose Cancel and press the k button to return to the print menu. • To view the current print order, choose View images and press the k button. To print pictures, press the k button again.
Basic Camera Setup Setup Menu The setup menu contains the following options. c d e f g U h Basic Camera Setup K u i k l/m n H V d p 152 Welcome screen A154 Choose whether or not to display the welcome screen on the monitor when the camera is turned on. Date A155 Set camera clock and choose home and destination time zones. Monitor settings A158 Adjust post-shooting image review and monitor brightness settings. Date imprint A159 Imprint the date on pictures.
Setup Menu P r A174 Reset file numbering Reset the file numbering. Firmware version Display camera firmware version. A174 Displaying the Setup Menu Switch to the z tab in the menu screen. 1 2 Press the d button to display the menu screen. Press J on the multi selector. 3 Press H or I to select the z tab.
Setup Menu c Welcome Screen Press the d button M z (Setup menu) (A153) M Welcome screen Choose whether or not to display the welcome screen on the monitor when the camera is turned on. None (default setting) Displays the shooting or playback screen without displaying the welcome screen. COOLPIX Displays the welcome screen before displaying the shooting or playback screen. Select an image Basic Camera Setup 154 Select a picture that you have shot to display as the welcome screen.
Setup Menu d Date Press the d button M z (Setup menu) (A153) M Date Set the camera’s internal clock. Date Set camera clock to the current date and time. Use the multi selector to set the date and time. • Highlight an item (day, month, year, hour, minute, and the order in which day, month, and year are displayed): Press J or K. • Edit the highlighted item: Press H or I. • Finish setting: After selecting the order in which the day, month, and year are displayed, press the k button (A23).
Setup Menu 3 Press K. • The time zone selection screen is displayed. Time zone 15/05/2010 15:30 London, Casablanca Home time zone Travel destination 4 Press J or K to choose the travel destination time zone. Basic Camera Setup • When using the camera in an area where daylight saving time is in effect, press H to set the clock to daylight saving time. When daylight saving time is turned on, the W icon is displayed and the clock advances by one hour.
Setup Menu D Time Zones The camera supports the time zones listed below. For time differences not listed below, set the camera clock using Date.
Setup Menu e Monitor Settings Press the d button M z (Setup menu) (A153) M Monitor settings Change the settings for the options below. Image review On (default setting): Picture is automatically displayed in the monitor immediately after it is taken and the monitor display returns to shooting mode. Off: Picture is not displayed after it is taken. Brightness Choose from five settings for monitor brightness. The default setting is 3.
Setup Menu f Date Imprint Press the d button M z (Setup menu) (A153) M Date imprint The shooting date and time can be imprinted in pictures at the time of shooting. This information can be printed even from printers that do not support printing of date and time (A109). 15.05.2010 Off (default setting) Date and time are not imprinted in pictures. Date The date is imprinted in pictures. Date and time At settings other than Off, the icon for the current setting is displayed in the monitor (A8).
Setup Menu g Vibration Reduction Press the d button M z (Setup menu) (A153) M Vibration reduction Specify the vibration reduction setting for taking still pictures. Correct blur, caused by slight hand movement known as camera shake, that commonly occurs when shooting with zoom applied or at slow shutter speeds. When the camera is stabilized for still picture shooting with a tripod, set vibration reduction to Off.
Setup Menu B Notes on Vibration Reduction • It may take a few seconds to activate vibration reduction after the power is turned on or the camera enters shooting mode from playback mode. Wait until the display stabilizes before shooting. • Due to characteristics of the vibration reduction function, images displayed in the camera’s monitor immediately after shooting may appear blurry. • Vibration reduction may be unable to completely eliminate the effects of camera shake in some situations.
Setup Menu U Motion Detection Press the d button M z (Setup menu) (A153) M Motion detection Enable motion detection to reduce the effects of camera shake and subject movement when shooting still pictures. Auto When the camera detects the movement of the subject or camera shake, the ISO sensitivity is raised and the shutter speed is increased to reduce their effects. However, motion detection does not function in the following situations.
Setup Menu h AF Assist Press the d button M z (Setup menu) (A153) M AF assist Enable or disable the AF-assist illumination that assists the auto focus when the lighting is poor. Auto (default setting) AF-assist illumination will be used to assist the focus operation when the subject is poorly lit. The illuminator has a range of about 10 m (32 ft.) at the maximum wideangle position and about 3.5 m (11 ft.) at the maximum telephoto position.
Setup Menu u Digital Zoom Press the d button M z (Setup menu) (A153) M Digital zoom Enable or disable digital zoom. On (default setting) When the camera is zoomed in to the maximum optical zoom position, rotating and holding the zoom control at g (i) triggers digital zoom (A29). Crop Limit zoom magnification up to the position of V (except when shooting a movie). Also limit digital zoom to the range at which image quality of shot still pictures does not deteriorate.
Setup Menu i Sound Settings Press the d button M z (Setup menu) (A153) M Sound settings Adjust the following sound settings. Button sound Turn button sound On (default setting) or Off. A beep will sound once when the settings are completed successfully, twice when the camera focuses on the subject, and three times when an error is detected. Start-up sound will also play when the camera is turned on. Shutter sound Choose shutter sound from On (default setting) or Off.
Setup Menu l/m Format Memory/Format Card Press the d button M z (Setup menu) (A153) M Format memory/Format card Use this option to format the internal memory or a memory card. Formatting the Internal Memory To format the internal memory, remove the memory card from the camera. The Format memory option appears in the setup menu. Format memory All images will be deleted! OK? Format No Formatting Memory Card When the memory card is inserted in the camera, the Format card option appears in the setup menu.
Setup Menu n Language Press the d button M z (Setup menu) (A153) M Language Choose one of 24 languages for display of camera menus and messages.
Setup Menu V Charge by Computer Press the d button M z (Setup menu) (A153) M Charge by computer Choose whether or not the battery inserted in the camera is charged when the camera is connected to a computer via USB cable (A145). Auto (default setting) When the camera is connected to a computer that is running, the battery inserted into the camera is automatically charged using power supplied by the computer.
Setup Menu d Blink Warning Press the d button M z (Setup menu) (A153) M Blink warning Choose whether or not blinking eyes are detected when using face priority (A91) in the following shooting modes. • Scene auto selector mode (A43) • Portrait (A46) or Night portrait (A47) scene modes • Shooting modes A, B, C, D or M (when Face priority (A90) is selected for AF area mode) On Off (default setting) Blink warning does not take effect.
Setup Menu Operating the Did someone blink? Screen The following operations can be performed when the Did someone blink? screen is displayed. If no operations are performed for a few seconds, the screen automatically returns to the shooting mode screen. Did someone blink? Exit To g (i) Return to full-frame playback f (h) Basic Camera Setup 170 Rotate the zoom control to g (i). Rotate the zoom control to f (h).
Setup Menu p Reset All Press the d button M z (Setup menu) (A153) M Reset all When Reset is selected, the camera settings will be restored to the following default values. Pop-up Menu Option Default value Flash mode (A34) Auto Self-timer (A37) OFF Focus mode (A38) Autofocus Exposure compensation (A41) 0.
Setup Menu Movie Menu Option Default value Movie options (A133) HD1080pP (1920×1080) HS movie options (A134) 240 fps Autofocus mode (A135) Single AF Electronic VR (A136) On Wind noise reduction (A136) Off Shooting Menu Option Basic Camera Setup 172 Default value Image quality (A75) Normal Image size (A76) M 3648×2736 Optimize image (A79) Normal Custom in Optimize image (A80) Contrast: Auto Image sharpening: Auto Saturation: Auto Custom of Black-and-white in Optimize image (A81) Con
Setup Menu Setup Menu Option Default value Welcome screen (A154) None Image review (A158) On Brightness (A158) 3 Date imprint (A159) Off Vibration reduction (A160) On Motion detection (A162) Off AF assist (A163) Auto Red-eye reduction (A163) Pre-flash on Digital zoom (A164) On Button sound (A165) On On Auto off (A165) 1 min HDMI (A167) Auto Charge by computer (A168) Auto Blink warning (A169) Off Others Option Default value Paper size (A148, 149) Default Slide show (A110)
Setup Menu P Reset file numbering Press the d button M z (Setup menu) (A153) M Reset file numbering When Yes is selected, the sequential numbering of file numbers will be reset (A181). After resetting, a new folder will be created and the file number for the next image taken will start from “0001.
Caring for the Camera Caring for the Camera To ensure continued enjoyment of this Nikon product, observe the following precautions when using or storing the device. B Keep dry The device will be damaged if immersed in water or subjected to high humidity. B Do not drop The product may malfunction if subjected to strong shock or vibration. B Handle the lens and all moving parts with care Do not apply force to the lens, lens cover, monitor, memory card slot or battery chamber.
Caring for the Camera C The Battery • Check the battery level when taking the camera out, and charge the battery if necessary. Do not continue charging once the battery is fully charged, as this will result in reduced battery performance. If possible, carry a fully-charged spare battery when taking pictures on important occasions. • Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F).
Caring for the Camera Cleaning Lens/ electronic viewfinder Avoid touching glass parts with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other end). To remove fingerprints or other stains that cannot be removed with a blower, wipe the lens with a soft cloth, using a spiral motion that starts at the center of the lens and working toward the edges.
Caring for the Camera Storage Turn the camera off when not in use. Check that the power-on lamp is off before putting the camera away. Remove the battery if the camera will not be used for an extended period.
Technical Notes and Index Optional Accessories Rechargeable battery Rechargeable Li-ion Battery EN-EL5 Charging AC Adapter Charging AC Adapter EH-68P/EH-68P (AR) Battery charger Battery Charger MH-61 AC Adapter EH-62A (connect as shown) 1 2 3 PUSH TO EJEC T AC adapter Before closing the battery-chamber/memory card slot cover, fully insert the cord of the AC adapter into the slot in the battery chamber.
Optional Accessories Approved Memory Cards The following Secure Digital (SD) memory cards have been tested and approved for use in this camera. All cards of the designated make and capacity can be used, regardless of speed.
File and Folder Names Pictures, movies, and voice memos are assigned file names as follows. DSCN0001.JPG Identifier (not shown on camera monitor) Original still pictures (voice memo attachment included), movies Small copies (voice memo attachment included) DSCN Extension (signifies the file type) Still pictures .JPG Movies Voice memos .MOV .
File and Folder Names • When image files or voice files are copied to or from the internal memory or memory card (A115), the file naming conventions are as follows: - Files copied using Selected images are copied to the current folder (or to the folder used for subsequent pictures), where they are assigned file numbers in ascending order following the largest file number in memory. - Files copied using All images, along with their folder, are copied together.
Error Messages The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them. Display Description A Solution O (blinks) Clock not set. B Battery is running low. Prepare to charge or change battery. 16, 18 N Battery exhausted. Battery exhausted. Set clock. Charge or change battery. 155 16, 18 Turn off camera, and allow battery to cool down before resuming use.
Error Messages Display P Card is not formatted. Format card? Yes No N Out of memory. Description • Choose lower image quality or smaller image size. • Delete pictures. Memory card is full. • Replace memory card. • Remove memory card and use internal memory. Error occurred while recording picture. Format internal memory or memory card. Camera has run out of Replace the memory card, or format file numbers. the internal memory/memory card. Technical Notes and Index 184 P Image cannot be saved.
Error Messages Display N Cannot record movie. N Cannot reset file numbering. N Memory contains no images. Description Time out error while recording movie. Choose memory card with faster write speed. No more folders can be created. Insert a new memory card, or format 24, 166, the internal memory/memory card. 174 No pictures in the internal memory or memory card. 24 • Pictures stored in the internal memory can only be viewed if no memory card is inserted.
Error Messages Display Description The built-in flash is not raised during the scene auto selector mode. N Lower the flash. Lower the built-in flash gently and The built-in flash is raised when recording shoot a picture. Note that sound of a movie. lowering the flash may be recorded. 35, 127 Remove lens cap if it is still attached, and turn the camera off and then on again. If the error persists, contact 21 retailer or Nikon-authorized service representative.
Error Messages Display Description A Solution PR Printer error: out of ink Replace ink, select Resume and press Ink cartridge is empty. the k button to resume printing.* PR Printer error: file corrupt An error caused by the Select Cancel and press the k image file has button to cancel printing. occurred. - * See the documentation provided with your printer for further guidance and information.
Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Refer to the page numbers in the right-most column for more information. Display, Settings and Power Supply Problem Monitor and electronic viewfinder are blank. Technical Notes and Index 188 A Cause/Solution • Camera is off. • Battery is exhausted.
Troubleshooting Problem A Cause/Solution Date and time of recording are not correct. • Still pictures recorded before the clock was set (when the 22, 155 “Date not set” indicator blinks during shooting) will have a time stamp of “00/00/0000 00:00”; movie recordings will have a time stamp of “01/01/10 00:00.” Set the correct date and time using Date in the setup menu. 155 • Check camera clock regularly against more accurate timepieces and reset as required. No information displayed in monitor.
Troubleshooting Electronically Controlled Cameras In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon-authorized service representative.
Troubleshooting Problem A Cause/Solution 164 Digital zoom cannot be used. • Off is selected for Digital zoom in the setup menu. • Digital zoom cannot be used in the following situations.
Troubleshooting Problem Pictures are too dark (underexposed). A Cause/Solution • • • • • • Flash is set to W (off ). Built-in flash window is blocked. Subject is beyond flash range. Adjust exposure compensation. Raise the ISO sensitivity. Subject is backlit. Raise the built-in flash, set Backlight of the scene mode or set the flash mode to X (fill flash). 34 28 34 41 84 34, 51 Pictures are too bright (overexposed). Adjust exposure compensation.
Troubleshooting Playback Problem A Cause/Solution File cannot be played back. • File was overwritten or renamed by computer or another – make or model of camera. • Interval timer shooting in progress. 87 • Movies recorded with cameras other than COOLPIX P100 127 cannot be played back. Cannot play a sequence. • Pictures shot continuously with cameras other than COOLPIX P100 cannot be played as a sequence. • Check the Sequence display options setting.
Troubleshooting Problem Technical Notes and Index 194 Cause/Solution A The PictBridge screen is not displayed when the camera is connected to a printer. With some PictBridge-compatible printers, the PictBridge startup screen may not be displayed and it may be unable to print pictures when Auto is selected for the Charge by 168 computer option in the setup menu. Set the Charge by computer option to Off and reconnect the camera to the printer. Pictures to be printed are not displayed.
Specifications Nikon COOLPIX P100 Digital Camera Type Effective pixels Image sensor Lens Focal length f/-number Construction Digital zoom Vibration reduction Autofocus (AF) Focus range (from lens) (approx.) Focus-area selection Electronic viewfinder Monitor Frame coverage (shooting mode) Frame coverage (playback mode) Storage Media File system File formats Technical Notes and Index Frame coverage (shooting mode) Frame coverage (playback mode) Compact digital camera 10.3 million 1/2.3-in. CMOS; approx.
Specifications Image size (pixels) • • • • • • 10 M 5M 2M PC 3:2 1:1 3648×2736 2592×1944 1600×1200 1024×768 3648×2432 2736×2736 • • • • • 8M 3M 1M VGA 16:9 3264×2448 2048×1536 1280×960 640×480 3584×2016 ISO sensitivity (Standard output sensitivity) • • • • • ISO 160, 200, 400, 800, 1600, 3200 Auto (auto gain from ISO 160 to 800) High ISO Sensitivity auto (ISO 160 to 1600) Fixed range auto (ISO 160 to 200, 160 to 400) Sport continuous mode (ISO 160 to 3200) Exposure Metering Exposure control Rang
Specifications Power sources Charging time Battery life* Dimensions (W × H × D) Weight Operating environment Temperature Humidity One Rechargeable Li-ion Battery EN-EL5 (supplied) AC Adapter EH-62A (optional) Approx. 3 h 30 min (when using Charging AC Adapter EH-68P/ EH-68P (AR) and when no charge remains) Approx. 250 shots (EN-EL5) Approx. 114.4 × 82.7 × 98.6 mm (4.5 × 3.3 × 3.9 in.) (excluding projections) Approx. 481 g (17.
Specifications Supported Standards • DCF: Design Rule for Camera File System is a standard widely used in the digital camera industry to ensure compatibility among different makes of camera. • DPOF: Digital Print Order Format is an industry-wide standard that allows pictures to be printed from print orders stored on the memory card. • Exif version 2.2: This camera supports Exif (Exchangeable Image File Format for Digital Still Cameras) version 2.
Index Symbols A A/V cable 179 AC adapter 179 Active D-Lighting 95 AF area mode 90 AF assist 4, 163 Aperture 67 Aperture-priority auto 70 Audio/video cable 138 Audio/video-in jack 138 Auto 34 Auto bracketing 89 Auto mode 26 Auto off 165 Autofocus 39, 60, 93, 135 Autofocus mode 61, 93 AV cable 138 B B&W + color 81 Backlight o 51 Backlit scene HDR D 52 Battery 16, 18, 179 Battery charger 20, 179 Battery level indicator 26 Battery-chamber/memory card slot cover 16, 24 Beach/snow g 48 Best shot selector 86 Bl
Index Distortion control 94 D-Lighting 121 DPOF printing 151 DSCN 181 Dusk/dawn i 48 E Electronic viewfinder 14 Electronic VR 136 Exposure compensation 41 Exposure mode 66 Extension 181 Eyelet for camera strap 7 F Technical Notes and Index Face priority 90 File name 181 Fill flash 34 Fireworks show m 51 Firmware version 174 Fixed range auto 84 Flash exposure compensation 93 Flash indicator 36 Flash mode 34 Focus 30, 90, 93 Focus area 30 Focus indicator 30 Focus lock 31 Focus mode 38 Folder name 181 Food
Index Night portrait e 47 Nikon Transfer 141 Noise reduction 94 Number of exposures remaining 26, 77 Resetting Saved Settings 100 Rotate image 114 RSCN 181 O Panorama assist p 52, 53 Paper size 148, 149 Party/indoor f 47 PictBridge 146, 198 Picture editing 118 Pictures in a sequence 102 Playback 32, 101, 104, 105, 106, 117, 137 Playback menu 107 Playback mode 32 Playback zoom 106 Portrait b 46 Power 21, 22, 26 Power connector cover 4, 179 Power switch/power-on lamp 18, 21 Preset manual 83 Pre-shooting ca
Index V Vari-angle monitor 6 Vibration reduction 160 Video output 167 Voice memo 117 Volume 137 W Welcome screen 154 White balance 82 Wide 29 Wind Noise Reduction 136 Z Zoom 29 Zoom control 29 Technical Notes and Index 202
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.
