Digital Camera User Manual

Overexposure
Underexposure
Check point
2
Set the shutter speed (30-1/2000
sec.) with the Command Dial.
3
Compose picture, confirm focus
indicator. and shoot.
• When the subject is too dark or too bright, one
of the following warning indications will appear
in the viewfinder and LCD panel. (Over- or
underexposure value is indicated with the
electronic analog exposure display
in the
viewfinder.)
• H :: Select higher shutter speed. If the
warning indication still remains
on , use
an NO filter (optional).
• lo : Select slower shutter speed . If the
warning indication still remains
on , use
the Speed light. When the Speed light is
used, fastest shutter speed
is limited to
1/90 sec.
• If the subject is too dark or backlit, the flash
re commended indication ~ blinks in the
viewfinder when you lightly press the shutter
release button. Use the Speedlight (page
80/
91) .
• If - - (Long Time exposure) is selected
in Manual exposure mode and the exposure
mode is changed to Shutter-Priority Auto without cancelling - - , - - blinks and the
shutter locks.
To shoot in Shutter-Priority Auto exposure mode, select shutter speed
other than - - by rotating the Command Dial.
57
I
I