Reference Manual

E47
Reference Section
Using Preset Manual
Use the procedure below to measure the white balance value under the lighting used during
shooting.
1 Place a white or gray reference object under the lighting that will be
used during shooting.
2 Use the multi selector HI to select Preset
manual in the White balance menu, and
press the k button.
• The camera zooms in to the position for measuring white
balance.
3 Select Measure and frame the reference
object in the measuring window.
• To apply the last measured value, select Cancel and press
the k button.
4 Press the k button to measure the value.
• The shutter is released and measurement is complete. No image is saved.
B Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting using the flash,
set White balance to Auto or Flash.
Preset manual
Incandescent
In c an de sc en t
Incandescent
Fluorescent
Fl u o re sc en t
Fluorescent
Cloudy
Cl ou d y
Cloudy
Daylight
Da yl ig ht
Daylight
Au to
Auto
Flash
Fl a s h
Flash
White balance
Preset manual
Cancel
Measure
Measuring window