Product Manual
Table Of Contents
- Nikon XF Series Total Station Instruction Manual
- Legal Notices
- Safety
- Introduction
- Preparation
- Unpacking and Packing the Instrument
- Charging the Battery Pack
- Detaching and Re-Attaching the Battery Pack
- Setting Up the Tripod
- Centering
- Leveling
- Sighting and Focusing
- Setting the Measurement Mode and Preparing the Target
- Measurement in Reflectorless mode
- Setting Up the Prism Reflector
- External Device Connector
- Getting Started
- Checking and Adjustment
- System Diagrams
Safety
viii Nikon XF Series Total Station Instruction Manual
XF Series
Table 1.1 Specifications for laser emission
Laser pointer Class 2
Wave length 630-680 nm
Output power CW Po ≤ 1 mW
Disatance meter Class 1
Wave length 850-890 nm
Output power Pulse Po ≤ 22 W
Pulse width < 5 ns
Laser plummet Class 2
Wave length 635 nm
Output power CW Po < 1.0 mW
Table 1.2 Conforming standards
E.U. IEC60825-1:2014
Laser Pointer: Class 2
Distance Meter: Class 1
Laser plummet: Class 2
USA FDA21CFR Part 1040 Sec.1040.10 and 1040.11
(except for deviations pursuant to Laser Notice No.50, dated June
24, 2007)
XF HP Series
Table 1.3 Specifications for laser emission
Laser pointer Class 3R
Wave length 630-680 nm
Output power CW Po ≤ 4.75 mW
Distance meter in Reflectorless mode Class 3R
Wave length 630-680 nm
Output power Pp < 8.75 mW Po < 4.75 mW
Pulse 1.2ns/400MHz - 1.6ns/320MHz
Distance meter in Prism mode Class 1
Wave length 630-680 nm
Output power Pp < 0.037 mW Po < 0.02 mW
Pulse 1.2ns/400MHz - 1.6ns/320MHz
Table 1.4 Conforming standards
E.U. IEC60825-1:2014:class 3R
USA FDA21CFR Part 1040 Sec. 1040.10 and 1040.11
(except for deviations pursuant to Laser No.50, dated June
24,2007)










