Product Manual
Table Of Contents
- Nikon XF Series Total Station Instruction Manual
- Legal Notices
- Safety
- Introduction
- Preparation
- Unpacking and Packing the Instrument
- Charging the Battery Pack
- Detaching and Re-Attaching the Battery Pack
- Setting Up the Tripod
- Centering
- Leveling
- Sighting and Focusing
- Setting the Measurement Mode and Preparing the Target
- Measurement in Reflectorless mode
- Setting Up the Prism Reflector
- External Device Connector
- Getting Started
- Checking and Adjustment
- System Diagrams
3 Getting Started
30 Nikon XF Series Total Station Instruction Manual
Cleaning of touch screen
Tapping the menu button [Clean Touch Screen]
disables the touch screen. Use this menu button
for cleaning the touch panel.
Press (Enter) key, and the display returns to
the screen shown before pressing [Power] key.
Adjustment of touch screen
Tapping the menu button [Align Touch Screen]
shows the touch panel adjustment window.
By following the instruction in this window, a
gap between the actual tapping point and button
on the window will be corrected.
Press [+] (plus) sign on the screen by stylus pen
over 1 second. The [+] (plus) sign will move to a
corner of the screen when you remove the stylus
pen. Pressing (Enter) key after you press
[+] (plus) sign on center and four corners completes the adjustment of touch screen.
Press [ESC] key to cancel the adjustment.
Reset
Tap the menu button [Reset].
[Reset] stops the program in process and initializes the Total Station. Use this menu
when the application program does not run normally because of an unexpected
reason.
Note – Once the Reset is executed, data that are not stored in the application program
will be lost.