Product Manual
Table Of Contents
- Nikon XF Series Total Station Instruction Manual
- Legal Notices
- Safety
- Introduction
- Preparation
- Unpacking and Packing the Instrument
- Charging the Battery Pack
- Detaching and Re-Attaching the Battery Pack
- Setting Up the Tripod
- Centering
- Leveling
- Sighting and Focusing
- Setting the Measurement Mode and Preparing the Target
- Measurement in Reflectorless mode
- Setting Up the Prism Reflector
- External Device Connector
- Getting Started
- Checking and Adjustment
- System Diagrams
Nikon XF Series Total Station Instruction Manual 29
Getting Started 3
Basic Operation
Standby
Press [Power] key, and the “Power Key!”
window shown on the right appears.
Tap [Standby] button on the window to turn off
the instrument.
Note – Standby
“Standby” is the function which stops the program running and turns off the
instrument.
Pressing [Power] key again returns to the screen displayed before the instrument is
turned off.
Options
Press [Power] key, and the “Power Key!”
window shown on the right appears.
Press [Options] button on the window to display
option menu.
Backlight
Tapping [Backlight On/Off] button on the option
menu switches on/off the back light.
Note – Use the stylus provided with the instrument on the touch screen. Any other
stylus may damage the touch screen.
Note – Lightly tap the touch screen with the stylus. Otherwise, you may damage the
touch screen.