User Manual

20
Ru
Se
Nl
Dk
Pl
Hu
Cz
Fi
No
En
De
Fr
Es
It
Ro
21
Ru
Se
Nl
Dk
Pl
Hu
Cz
Fi
No
En
De
Fr
Es
It
Ro
External display
Vertical separation (height between two points) mode
[Results]
After measuring two points, "Linear
distance to two points" and "Vertical
separation (height) and angle
between two points" are displayed.
Units can be shown in meters, yards
or feet. Angles are indicated by
°(degree).
Linear distance (1st point)
Linear distance (2nd point)
Vertical separation (height between two points)
Angle of two points
Unit
[Measuring1stpoint]
[Failed to measure 1st point]
Angle measurements never fail.
[Results of 1st point]
[Measuring2ndpoint]
[Failure to measure 2nd point]
Although the point is located
downward, display shows the
upward position.
Angle measurements never fail.
[Display of results for vertical separation (height between two
points) and 2nd point]
Vertical separation
(height between two points)
After displaying vertical
separation (height between
twopoints),pressingMODE
button displays the result of
the 2nd point.
Three-point measurement (height between two points) mode
[Results]
[Measuring1stpoint]
[Failed to measure 1st point]
[Results of 1st point]
Vertical separation (height between two points)
Angle of two points
Unit
After measuring horizontal distance
and two angles and its height,
"vertical separation (height) and
angle between two points" are
displayed. Units can be shown in
meters, yards or feet. Angles are
indicated by °(degree).
Displays the horizontal distance.
[Measuring2ndpoint]
[Results of 2nd point]
[Measuring3rdpoint]
[Results of 3rd point]
Whenmeasuring2ndand3rdpoints,pleasenotethatangles
shouldbebetween–75˚and+75˚fromthehorizontallevel.
Ifmeasurementfails,theangleisbeyond±75˚.
Whenmeasuring2ndand3rdpoints,pleasenotethatangles
shouldbebetween–75˚and+75˚fromthehorizontallevel.
Ifmeasurementfails,theangleisbeyond±75˚.