Quick Start Guide

4
ⅨⅧ
ⅡⅢ ⅣⅤⅥⅠ
Ⅶ
1st target point
2nd target point
Internal display
Display when three-
point measurement
mode is selected.
3rd target point
Three-point measurement (height between two points)
(Measurement order:
Ⅰ⇒Ⅱ⇒Ⅲ⇒Ⅳ⇒Ⅴ⇒Ⅵ⇒Ⅶ⇒Ⅷ⇒Ⅸ⇒Ⅱ
, then repeat)
Aiming at the
1st point.
Display of the horizontal
distance to the 1st point.
Aiming at the 2nd
target point.
Display of the vertical
separation (height from
horizontal level to 2nd
point).
Aiming at the 3rd
target point.
Display of the vertical separation
(height between 2nd and 3rd points).
Press POWER
button to measure
Press POWER
button to measure
Press POWER
button to measure
External display reading instructions
After the measurement of 1st target
point .
24.4 Hor 24.4 Hor
3.4
Hgt (1)
7.8̊
Ang (1)
17.4
Hgt (2)
37.8̊
Ang (2)
After the measurement of 2nd target point .
Display of the vertical separation (height from
horizontal level to 2nd point).
After the measurement of 3rd target point
.
(Display of the vertical height between 2nd
and 3rd points.)
This symbol indicates the display is blinking.
・
Power turns o 30 seconds after the last operation.
(Actual external display image)
(Actual external display image) (Actual external display image)
En De
When measuring 2nd and 3rd
points, please note that angles
should be between –75˚ and +75˚
from the horizontal level.
If measurement fails, the angle is
beyond ±75˚.