Quick Start Guide

3
Ang (1)
Act (2)
Hor
Hgt
Hgt + Hgt2
Ang (2)
Act (1)
1st target point
2nd target point
Internal display
Ⅰ
Ⅱ
Ⅲ
Ⅳ
Ⅴ
Ⅵ
Ⅶ
Display when the vertical
separation (height
between two points)
mode is selected.
Aiming at the
1st point.
Display of the height
from horizontal level of
1st point.
Aiming at the 2nd
target point.
Display of the
vertical separation
(height between
two points).
External display reading instructions
After the measurement of 1st target point
Ang (1)
Act (2)
Hor
Hgt
Hgt + Hgt2
Ang (2)
Act (1)
.
After the measurement of 2nd target point
Ang (1)
Act (2)
Hor
Hgt
Hgt + Hgt2
Ang (2)
Act (1)
.
(Display of the vertical height between two points.)
24.7̊
Ang (2)
51.0
Act (1)
49.0
Act (2)
21.4
Hgt+Hgt2
48.6
Hor
51.0
Act (1)
15.2
Hgt
17.4̊
Ang (1)
En En
Measuring vertical separation (height between two points)
(Measurement order:
Ⅰ⇒Ⅱ⇒Ⅲ⇒Ⅳ⇒Ⅴ⇒Ⅵ⇒Ⅶ⇒Ⅱ
, then repeat)
Press POWER
button to measure
Press POWER
button to measure
This symbol indicates the display is blinking.
・
Power turns o 30 seconds after the last operation.
(Actual external display image)
(Actual external display image)