User Guide

lFAA23051

- R.3248.A

Filter driving base plate unit, filter unit, TTL SPD unit

Lock tight (purple)

#1023 #1032

Filter sw cable holder ,

Filter switch cable

holder #1023

Spot SPD cable holder

#1032

spot SPD

caljle

#1126 X 3

Lock tight (purple)

holder)

Positioning pin for mounting

Filter driving

base plate

— D20

Fi~ter

driving

base

plate

+1126 X 3

Latched portion

filter driving base

plate unit and filter unit

‘

>/n

PAGE 1
lFAA23051 - R.3248.
PAGE 2
I lFAA23051 - R.3248. Lock tight (purple) 015 Filter top cover This will be latched with Filter driving base plate unit Infrared cut filter Filter holder Filter bottom cover Note : Inspection after mounting filter unit: Filter holder will slide by its own weight when the front body is declined. * TTL SPD holder is attached with 5 minute epoxy.
PAGE 3
FAA23051 - R.3248., Removing mirror box Adhesive (Alon Alfa Light baffling plate . @ #1052 X 2 ‘% #lo50 x 2 Note: Move aside the mirror box toward viewfinder side when mounting.
PAGE 4
FAA23051 - R.3248.1 Aperture Mgr mirror unit, I base plate, L base plate unit “, Mirror down lever I n Mirror unit \\ idjust mirror thrust Washer is included.
PAGE 5
]FAA23051 lAFdriving - R. 3248.1 baseplate unit, fobaseplatel Remove adhesive green cable #1048 fo lever of I Remove fo lever spring (#410) Remove mounting screw #1048 X 2 Remove AF drivng base plate and f. lever together without bending the f. brush. Set the f. lever at the location indicated by arrow a.