User Guide

I FAA 230 51
- R.3248. I
lPositioning adjustment of fmm switchl
Screw lock
fmm base plate
(#350)
\
#1037x2
rC switch
\/l
(
Emm
lbrown)
white)
o
I H-
fmm signal lever
w
o
I
Protection ring
\
a
(1) Connect a tester between
the TC switch (white) and
the body (GND) .
(2) Mount the 50mm (f/1.4) AI
lens on the body. Do not
move
any further once
the protection ring of
the 50mm f/1.4 AI lens
(indicated by arrow a)
pushes the fmm signal
lever.
(3) Fasten the fmm base plate
(4
Noi_e :
at the point when th= TC
switch is changed from ON
to OFF by moving the fmm
base plate.
Then the fmm
signal lever brush should
be positioned at the
center of the TC switch
and the fmm switch
patterns.
The fmm switch should be
off when the 50mm f/1.4
AI lens is removed.
Correct lens:
50mm f/1.4 AI
(Do not use 50mm
f/1.4
AI-S and AF 50mm f/1.4.)
—A42—