User Guide

1) Adjustment of f–fo pulley stop position
Aperture coupling ring is attached to the stopper.
/
The f–fo pulley
&
to the stopper.
\f
Use adhesive
[
(Alon Alfa) to-
W
attach.
c-
#403
is being attached
Q
v
o
>,
$
\
.
+
Adjust by rotating #403 so that the aperture coupling
ring and the f–fo pulley come into contact with the
stopper simultaneously.
2) Adjustment of the f–fo base plate position.
J
‘iq.
~–fo base plate
\ Screw lock
10X2
(1)
(2)
(3)
]urple)
(yellow)
ig a-
.
(4)
Mount the f–fo tool lens
(J18202) on the body.
Set the digital voltmeter (at
the resistance measuring
range) as shown in Fig. a.
Adjust by rotating the f-fo
base plate so that each
resistance value can be
measured when the f–fo tool
lens (J18202) is moved aside
as shown in Fig. b.
Resistance value is 624 to
936f2 when the tool lens is
moved in the direction
indicated by arrow c.
Resistance value is OQ when
moved in the direction
indicated by arrow d.
Fasten screws (#1010x2) and
spread screw lock (#350) on
them.
—A39—