User Guide

)
FAA23051 - R.3248.,
Mirror operation base plate unit
See page D17.
Check preview bottom and mirror up operations
f–fo base plate, f–fo pulley
— f–fo base plate
See page D18.
— f–fo pulley
f–fo pulley stopper
Mount by rotating the
pulley once clockwise
while aligning the f–fo
pulley spring (#402) with
the f–fo pulley shaft
groove .
#1087
Note :
Do not damage
the plastic mold
shaft of the f–fo
pulley.
087
*
I
Aperture co
ring thread
.
Reel aperture
coupling ring thread
in the #403 groove.
(See figure a)
Note :
(1) Thread knot
should not be pushed
out from the surface
of the f–fo base
plate.
(2) Aperture
coupling ring thread
should be hooked in
the roller on the AF
mode selector base
plate.
(3) Aperture
coupling ring thread
should not be bent.
a
— A38—