User Guide

lFAA23051
- R.3248.A
,/
.
#lolo
Screw lock (#350)~
Frame counter
scale plate mask
&ll!l$
i
*
#583 ‘
Lock tight
Frame counter
scale plate
G103~
counter gear
Stopper
5) Upper film advance
unit
Frame counter reset
spring
I
Frame counter gear
Fix with a stopper after
rotation the gear two
turns in the direction
indicated by arrow a
(clockwise)
I
#583
Frame counter scale
Use G103 to stick the
projected portion of
the frame counter gear
and the caved portion of
/
l’”
+
. . the frame counter scale.
Frame counter
Shutter charge
&reset spring
completion sw
Frame counter scale
\
:$.
I -’
plate mask
#lolo
al ,
n
Cut-outW’s”
/
-,*.
W ““P ““’
%
Cut-out of #576
W*,
should be faced with #577.
Film advance completion switch
b
Adhere each screw with screw lock (#350) .
Apply oil (G92KA’
on each gear and lever.
m
l=+
:..
:
.
Frame counter
1
scale
n
I
Index
Inspection (ON–OFF)
“ Shutter charge completion switch
● Film advance completion switch
“ Frame counter switch
Frame counter scale goes off between
frame counter O and 1 when the frame
counter gear is rotated clockwise.
● Check the location of the frame counter
scale mask
Frame counter scale is within the range of
more than 2/3 of the width of the counter
index (counter scale plate mask) . See the
figure at left.
Adjustment : Adjust by moving the frame
counter scale plate mask after unfastening
#lolo.
—A19—