User Guide

.,.
h
I FAA23051-R.3248. A
3. Exposure control
(1) Programmed auto exposure modes (P, PH mode)
P, PH mode with DP-20 multi-meter finder ,rnounted
Item” Description ‘
i“
Built-in CPU lens P and PH modes are’ available.
,.
Non-CPU lens ; Automatically shifted to A mode
(including A
F lens
Viewfinder ”display also shifted to A
for F3) mode
Shutter speed control
Refer to the EV chart (controlled
within the range of 30 to 1/8000
sec.)
Shutter speed display
Indicated in l/2EV steps in the
viewfinder
Aperture value control Refer to the EVchart (controlled
within the range of f-number (F-FO)
of the lens mounted) .
Aperture value display
Indicated in
l/2EV.st@pS in the
. . .
viewfinder
,,
,,.,,,
Ale~t” display ----
.,,
FEE ->
.,:
● FEE appears:if the lens is not set
to the aperture valuew ithin the
range of 2/3EV. from the’’smallest
aperture setting. ‘“ -,
● Shutter release isnot locked.
● Programmed exposure control is
performed based on that aperture
value as its smallest one.
. .
When shutter dial is
Shifted to M mode:
set to
“T” setting.
“ Shutter speed is set to “T”
setting.
c Stops down to the smallest
aperture value (specified aperture
value)
● Neither shutter speed, aperture
value, nor exposure mode are
displayed in the viewfinder. “--”
sign is
dis@~ye,@ instead in place
‘“
of shutter speed.
Remains in P -mode when set to “X”,
“B” or other “settings.
~
Overexposure or
HI or Lo sign appear’s in the
underexposure
viewfinder ,.. .
Shutter release is not locked.