User Guide

FAA23051-R.3248.A

(6)

(7)

Metering system is automatically changed in center-

weighted metering mode when a lens other than one of

those mentioned above is mounted, or no lens is mounted

in matrix metering mode.

For further details, see your

instruction manual.

‘

Metering area and its output

Two matrix vertical sensors incorporated in the multi-

meter finder detect the vertical and horizontal position.

When the sensor detects the vertical position of the

camera, the metering output of the top and bottom of the

segments changes automatically. (The sensor does not

detect the reverse position.)

See page MS.

Center-weighted metering

Multi-meter finder DP-20 calculates the correct exposure

by using the metering output (BVO) of the SPD sensor.

(See page MS.)

Central-weighted metering concentrates 60%

10% of the

metering of the meter’s sensitivity. (Approx. 12mm circle

at the center of the viewfinder) .

AE action finder DA-20 calculates the correct exposure

using the metering output of a cell of the SPD on the

upper part of the eyepiece.

Spot metering

The spot metering sensor is incorporated into the camera

body .

SPD is located in the AF sensor module.

The area metered is represented by the approx. 5mm-

diameter circle at the center of the viewfinder,

equivalent to the area of the prism of the type K

focusing screen.

—M4—