User Guide
.
.
*
,.,
,!
,
I
@AA23051-R.3248.A
(4)
Q
Filters for autofocus -
,-
.
Two filters for normal shooting and AF illuminator are
incorporated which switch automatically according to the
shooting situation to improve AF
actiracy
by
‘eliminating
the error of illumination. (See below)
.,.
Filter will be switched when the spot metering value is
less than BV2 or over BV5 as described below while
pressing the shutter release button lightly under the AF
illuminator firing condition.
“a.
AF’ill~mifia”tor’
filter
whefl
the spot
ketc!ring
value
is
~2
Or
less.
b.
NormaI Shodting “filter
whefi
’the spot metering value
,.
is’ BV5 or
0Vf3r.
.,
There is some difference ih’metering values “between “a”
and
“b’?
(as mentioned above) so that the filter is not
switched due to
sligQt’
variation of brightness.
The filter is hot switched when the shutter release
button is not lightly depressed(or shutter prerelease
timer is activated.) As a
~esult,
‘the
filtei
for normal
shooting will be switched to the one” for
‘Z#’illurninator
when the AF
illumirhtor
fitiingeondi%ion
is satisfied.
‘.
AFilluniindtor firing conditions:
~~
‘
- -
● The power is ON and the flash unit is mounted.
● Focus mode is set to AF-S.
● Spot metering value is less than BV2.
. . .
* The ‘focus-does not “stay-locked. ”
c
AF lens is mounted.
.
. .,
(Z9
When the
fil?kr
moves
‘bac~’and:
fortfi”t&
remove dust on
.
‘the filter after the cbinpletion of auto’
f:lrn-loadin-g,
regardless” of focus mode selection. (Shutter can be
released”durifig
this’.
operation:)
-..
-,.
(5)
Autofocus lock
..’
With the AF-L;button or the autofocus lock button on the
lens side depressed,
focusing operation will be locked,
AF display will be locked, and shutter prerelease timer
is
extended.
. .
—M2—