User Guide

! F~23051-R.3248.A
*If T setting .is canceled before shutter
prerelease timer turns OFF, immediately
the mirror moves downward and film
advances in 32 seconds after shutter is
released.
Rear curtain sync flash photography ah T (time) setting is
automatically switched to front-curtain sync. (Rear-curtain
sync is impossible.)
T (time) setting “ Basically mechanical control.
“ Current flows to the Mg for 32 seconds
after shutter is released at T setting.
The power is ON for 32 seconds to
activate the camera body for more than
20 seconds at “T’’setting, because
current flows for maximum 20 seconds in
repeating flash mode of the SB-24.
“ Click sound may”be heard in 32 “seconds
after releasing the shutter at T
setting,
this means that the shutter
:
curtain held by Mg is switched to that
held by mechanically.
(13) Self-timer
10-Sec.
self-timer --------- Self-timer LED starts blinking
at 2Hz during the first 8
seconds
f
and at 8Hz during the
final two seconds.
Cancel of self-timer ------
Turn the film advance mode
B (bulb) -------------------------
T (time) ------------------------
AF and AE----------.=-----=----
AF-s
.-. .- . . . . . . --- . . . . . . . . . --- -. .
Sequence ----------------------
(14
Multiple exposure’
selector to another setting. The
self-timer mode is not canceled
automatically when a self-timer
shooting has been completed.
Shutter speed is automatically
set to 1/250 sec. at the “B”
setting.
Self-timer shooting is possible
at “T” setting.
Autofocus and auto exposure
modes activate in self-timer
operation.
Autofocus driving is
possible by pressing the shutter
release button lightly in self-
timer operation.
Shutter is released whether or
not the subject is in focus,
even in the AF-S mode, after
the timer operation ends.
Film advance and mechanical
charge operations return to
series driving when self-timer
shooting has been completed.
,,-.
The multiple exposure lever returns to its original
position after the exposure.
—Mll
—