Operating Instructions

This activates the exposure meter. The meter stays on for 16 seconds after you take your finger off the button and
turns itself off automatically to conserve battery power.
6. Check battery power.
Look through the viewfinder at the liquid crystal display (LCD). The shutter speed should be displayed to
show that the batteries have been properly installed and their power is adequate. If not, replace both batteries.
7. Mount the lens onto the camera.
Grasp the lens by its mounting ring . Then line up the focusing index ) on the lens with the white dot
) on the camera body and twist the lens counterclockwise until it clicks into place.
To remove: Push the lens release button and turn the lens clockwise until it comes off.