Operation Manual

1312
Start Shooting Immediately
1
Open the battery chamber and install batteries while the
camera’s power is off (page 16).
2
Attach the lens and turn the power switch on (page 18).
3
Open the camera back and install the film (page 20).
• When the camera back is closed, the film is automatically advanced and the
number of available exposures is displayed in the LCD panel.
4
Set the focus mode selector to AF (autofocus) (page 26) and
the exposure mode dial to a (AUTO mode) (page 28).
5
Hold the camera properly, compose frame and focus by
lightly pressing the shutter release button (page 30).
6
Confirm focus indicator / appears without blinking and
slowly depress the shutter release button (page 32).
7
Film starts to rewind automatically when it reaches the end
of the roll (page 33).
• Make sure E is blinking in the LCD panel when removing the film cartridge.
START SHOOTING IMMEDIATELY
F55 (E) 03.4.15 7:51 PM Page 12