Technical Guide(Useful Features)

39
Digitizing 35 mm Film
Digitizing Positives (Slides)
The recommended procedure for digitizing slides using
the ES-2 is described below.
1
Ready the equipment.
Set up the equipment as shown on page 32.
2
Start live view.
Rotate the live view selector to
C (live view photography) and
press the a button to start live
view.
3
Adjust camera settings.
We recommend using the Flat Picture Control and
shooting in mode A at an aperture of around f/8.
Should you notice icker when shooting under uo-
rescent lighting or the like, try adjusting settings to
slow shutter speed to the point that the icker is elimi-
nated. Matrix metering is recommended, although
highlight-weighted metering can be used if you nd
that highlights are washed out. We also suggest us-
ing auto white balance, switching to a setting that
matches the light source if auto white balance fails to
produce the desired results.
l