Technical Guide(Useful Features)
10
“Focus Shift Shooting”
The Focus shift shooting item in
the photo shooting menu is used to
adjust settings for focus shift pho-
tography. The following options are
available:
• Start: Start shooting. The camera will
change the focus distance by the
selected amount with each shot.
• No. of shots: Choose the number of shots (up to 300) that
you will need when performing focus stacking.
• Focus step width: Choose the amount the focus distance
changes with each shot. The options available range
from 1 to 10: choose lower values for smaller steps, high-
er values for larger steps.
• Interval until next shot: The time between shots, in seconds.
Select 00 to take photos at approximately 5fps (release
modes S, Cl, Ch, and Mup) or 3fps (release modes Q and QC).
• Exposure smoothing: If On is selected, the camera will adjust
the exposure for each new shot to match the immedi-
ately preceding shot.
• Silent photography: Select On to silence the shutter during
shooting.
l