Menu Guide

61Menu Guide
Choose the setting or settings bracketed when auto bracketing
is in effect. Choose AE & flash bracketing (j) to perform both
exposure and flash-level bracketing, AE bracketing (k) to
bracket only exposure, Flash bracketing (l) to perform only
flash-level bracketing, WB bracketing (m) to perform white-
balance bracketing, or ADL bracketing (y) to perform
bracketing using Active D-Lighting. Note that white balance
bracketing is not available at image quality settings of NEF
(RAW) or NEF (RAW) + JPEG.
A Flicker Reduction in the Photo Shooting Menu
Take a test shot and view the results before taking additional
photographs. Flicker reduction can detect flicker at 100 and 120 Hz
(associated respectively with AC power supplies of 50 and 60 Hz).
Flicker may not be detected or the desired results may not be achieved
with dark backgrounds, bright light sources, or decorative lighting
displays and other non-standard lighting. Depending on the light
source, there may be a slight delay before the shutter is released.
During burst shooting, the frame rate may slow or become erratic; in
addition, the desired results may not be achieved if the frequency of
the power supply changes during shooting.
Flicker detection will not take effect at shutter speeds slower than
1
/ 100 s (including Bulb and Time) or when MUP is selected for release
mode or exposure delay mode is on.
Auto Bracketing Set
G button ➜ C photo shooting menu