Operation Manual

156
t
❚❚ White Balance Bracketing
The camera creates multiple copies of each photograph, each with a different white
balance.
For more information on white balance, see page 115.
1 Select white balance bracketing.
Choose WB bracketing for Custom Setting e6 Auto
bracketing set.
2 Choose the number of shots.
Pressing the D button, rotate the main command dial to choose the number
of shots in the bracketing sequence and the order in which they will be taken.
D will be displayed in the viewfinder (see right); the
control panel will show W.
3 Select a white balance increment.
Pressing the D button, rotate the sub-command dial to choose from
increments of 1 (5 mired; 0 119), 2 (10 mired), or 3 (15 mired).
The B value
indicates the amount of blue, the A value the amount of amber (0 117).
The bracketing programs with an increment of 1 are listed below.
Number of shots
Bracketing progress
indicator
D button Main command dial Control panel
White balance
increment
D button Sub-command dial Control panel
Control panel Bracketing progress indicator No. of shots Increment Bracketing order
21B0 / 1 B
21A0 / 1 A
3 1A, 1B 0 / 1 A / 1 B