Technical Guide(Useful Features)

Synchronizing Clocks

Via Ethernet/Wireless LAN

When [No] is selected for [Location

data (built-in)] > [Set clock from

satellite] in the setup menu, a mas‑

ter D6 can be used to set the clock

on a remote D6 camera connected

via an Ethernet cable or an optional

WT‑6 wireless transmitter. All [Time zone and date] set‑

tings in the remote camera’s setup menu will be adjusted

to match the settings on the master camera.

Enable wired LAN/WT functions.

Select [Enable] for [Wired

LAN/WT] > [Wired LAN/WT

functions] in the setup menus

for both the master and remote

cameras.

Choose the network hardware.

On both the master and re‑

mote cameras, select [Wired

LAN/WT]> [Choose hardware]

and choose the option match‑

ing the hardware that will be

used to connect the cameras.

Choose [Wired LAN] if the cameras will be connected

via an Ethernet cable or [Wireless LAN] if you are using

WT‑6 wireless transmitters.