Technical Guide(Useful Features)
20
4
Start the log.
After returning to [Location
data (built-in)]> [Create log] in
the setup menu, highlight [Log
location data] and press
J
.
The camera will log its position
at the selected interval for the
selected time; the time remain‑
ing can be viewed by selecting
[Location data (built-in)]. To
end, pause, or resume record‑
ing, highlight [Log location
data] and press 2.
Logs
Logs can only be created if the camera clock is set. When
tracking is active, the camera continues to monitor its posi-
tion even when o; tracking will only end before the specied
log length is reached if the battery is exhausted or removed
or if [O] is selected for [Location data (built-in)]> [Record
location data] in the setup menu. Note, however, that no
log entries will be added at times when the camera is unable
to acquire location data. To prevent logs ending prematurely,
be sure the battery is fully charged before tracking starts.