Reference Manual (complete instructions)

278 Technical Notes
❚❚ Supplied Accessories
• 67 mm snap-on Front Lens Cap LC-67
• Rear Lens Cap
❚❚ Compatible Accessories
• 67 mm screw-on filters
• Rear Lens Cap LF-4
• Flexible Lens Pouch CL-1018
• Bayonet Hood HB-32
Align the lens hood mounting mark (●) with the lens hood alignment mark ( ) as
shown in Figure q and then rotate the hood (w) until the ● mark is aligned with
the lens hood lock mark (—{).
When attaching or removing the hood, hold it near the symbol on its base and
avoid gripping it too tightly. Vignetting may occur if the hood is not correctly
attached. The hood can be reversed and mounted on the lens when not in use.