User Guide

- Ａ52 ･ -
VBA12001-R.3668.A
Shooting Image Adjustment
1. Summary
When D50 shooting image-related and listed parts on Page A51 are replaced, be sure to make an adjustment
by the shooting image adjustment software for D70s (J65076). The details of its function and how to use this
software are as follows:
2. Adjustment software function
(1) "Sensitivity" adjustment
(2) Gr/Gb compensation adjustment (R/B lter)
(3) "Sensitivity ratio" adjustment
(4) Gr/Gb compensation inspection (No lter)
(5) CCD black point defect compensation
(6) CCD white point defect compensation
(7) "Sensitivity" and "Sensitivity ratio" reference values calculation
(8) "TFT angle of view" adjustment
(9) Reading of RISC version
※ When the adjustments from (1) to (3) are made, calculate the sensitivity and sensitivity ratio reference
values of (7) by using the reference body in advance, then perform the adjustments.
3. Hardware requirements
OS： Widows98SE，Windows2000，WindowsXP
Japanese or English OS
PC： CPU Pentium Ⅱ or more
Memory 128MB or more
USB1.1
Screen size: 1024×768 pixels or more
4. How to set up
Create any directory in the harddisc of PC, and copy the following les.
・D50IMG.exe・・・・・・・・ Application le
・STD.DAT・・・・・・・・・ Standard le
・NkdPTP.dll・・・・・・・・・USB-communication application extension le for WinXP
・NkdPTPDi.dll・・・・・・・・USB-communication application extension le for Win98SE,Win2000
※ Be sure to copy the above les in the same directory.
5. Install USB driver
When this software is used, USB driver becomes necessary. However, USB-driver installation is not needed
if USB driver has already been installed at the time of installing "D50 inspection and adjustment program".
As for WindowsXP, the installation is neither needed, because it is already included in OS.