User Guide

- Ａ49 ･ -
VBA12001-R.3668.A
#5692
#5697
#5677×7
Bottom cover
・
Attach the bottom cover with the screw
(
#5692), the screw
(
#5697), and 7 screws
(
#5677).
Bottom cover
・
Replace the nder screen with the innity focus check screen (J15410), and use the reference lens (J18010)
and read the value. In case it is out of standard, increase or decrease washers (#297A or#297B) for
adjustments. * Supply the power (Battery or EH-5) for checking.
∞ Innity alignment & adjustment
Reference
line
"0" position
J18010
Standard:
±0.07mm
（
1 scale
＝
0.01mm
）
Value of J18010 Adjustment
+0.07
～
-0.07 Adjustment unnecessary if within standard
+0.08
～
+0.15 Decrease washers (#297) (for thinning)
-0.08
～
-0.15 Increase washers (#297) (for thickening)
+0.15 or more; -0.15 or less Check if Front body or Penta box is not
deformed.