Technical Guide(Useful Features)

23
Recalling Saved Exposure Settings
Aperture
If you switch lenses and then save exposure settings with-
out rst changing the aperture, you may nd that the stored
value is not supported by the lens. For example, if you set
aperture to f/1.4, then attach a new lens with a maximum ap-
erture of f/2.8 and save exposure settings without rst adjust-
ing aperture, the saved settings will have an aperture value of
f/1.4. This is not a malfunction.
“Recall Shooting Functions”
With the exception of program shift, exposure settings cannot
be adjusted while the control selected for Recall shooting
functions is pressed. Saved settings cannot be recalled while
the self-timer is in use, live view, movie recording, bracketing,
or multiple exposure shooting is in progress, or the control to
which Preview has been assigned using Custom Setting f1
(Custom control assignment) is pressed. Exposure settings
cannot be saved or recalled if:
• A non-CPU lens or a PC micro 85 mm f/2.8D lens is attached
• A CPU lens with an aperture ring is attached and Aperture
ring is selected for Custom Setting f4 (Customize com‑
mand dials)> Aperture setting
• A CPU lens with an aperture ring is attached without rst
locking aperture at the minimum setting
Recall shooting functions can also be assigned to an op-
tional wireless remote controller using the Assign remote
(WR) Fn button option in the setup menu.