Network Guide

51
❚❚ Master Camera
Configure the master camera as follows:
Group Name
Enter a group name of up to 16 characters
(010). The master and remote cameras must
all be in the same group.
Master/Remote
Select Master camera to designate the
current camera as the master camera. Each
group can have only one master; pressing the
shutter-release button on the master releases
the shutters on the remote cameras.
Remote Camera Check
Select On to check whether the remote
cameras are ready. The camera network
indicator (and the LED lamp on the WT-5, if
applicable) will flash amber to warn if the
number of cameras returning “ready” is less
than that selected for Number of remote
cameras.
Number of Remote Cameras
Enter the number (1–10) of remote cameras
in the group. This option is available only if
On is selected for Remote camera check.