No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. Network Guide Printed in Singapore SB5L01(11) 6MB29811-01 • Read this manual thoroughly before using the camera. • After reading this manual, keep it in a readily accessible place for future reference.
What Networks Can Do for You This guide describes how to connect to a network, access the camera remotely, and upload images to computers and ftp servers over Ethernet connections.
Control multiple cameras (requires optional WT-6 or WT-5 wireless transmitters) Synchronized release (049) A Tip See page 5 for information on configuring the camera for connection to a host computer, page 39 for information on configuring the camera for connection to an ftp server. Nikon Manual Viewer 2 Install the Nikon Manual Viewer 2 app on your smartphone or tablet to view Nikon digital camera manuals, anytime, anywhere.
Trademark Information IOS is a trademark or registered trademark of Cisco Systems, Inc., in the United States and/or other countries and is used under license. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac, OS X, iPhone, and iPad are registered trademarks of Apple Inc. in the United States and/or other countries. XQD is a trademark of Sony Corporation. CompactFlash is a trademark of SanDisk Corporation.
Notices • No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written permission. • Nikon reserves the right to change the appearance and specifications of the hardware and software described in this guide at any time and without prior notice. • Nikon will not be held liable for any damages resulting from the use of this product.
• Cautions on certain copies and reproductions The government has issued cautions on copies or reproductions of securities issued by private companies (shares, bills, checks, gift certificates, etc.), commuter passes, or coupon tickets, except when a minimum of necessary copies are to be provided for business use by a company. Also, do not copy or reproduce passports issued by the government, licenses issued by public agencies and private groups, ID cards, and tickets, such as passes and meal coupons.
Illustrations The appearance and content of the software and operating system dialogs, messages, and displays shown in this guide may vary with the operating system used. For information on basic computer operations, see the documentation provided with the computer or operating system.
Table of Contents What Networks Can Do for You.........................................................ii Notices........................................................................................................v Introduction 1 Network Options.....................................................................................2 The Wireless Transmitter Utility ........................................................4 Transfer, Control, and HTTP 5 Ethernet Connections ............................
FTP 39 Ethernet Connections........................................................................ 39 Step 1: Connecting an Ethernet Cable .................................... 40 Step 2: Enabling the Ethernet..................................................... 41 Step 3: The Connection Wizard.................................................. 41 For information on connecting to a wireless LAN using an optional WT-6 or WT-5 wireless transmitter, see the manual provided with the device. FTP Upload.........
x
Introduction This guide describes how to use the camera in (chiefly Ethernet) network environments, including connecting to and operating the camera in a network. Be sure to read this guide and the camera manual thoroughly and to keep them where they will be read by all those who use the product. Information on using optional WT-6 and WT-5 wireless transmitters can be found in the manuals for the devices in question.
Network Options The camera can be connected to Ethernet or wireless networks using the built-in Ethernet port or an optional WT-6 or WT-5 wireless transmitter (note that an Ethernet cable — available separately from commercial sources — is required for an Ethernet connection).
A Routers Connection to computers on other networks via a router is not supported. A Firewall Settings TCP ports 21 and 32768 through 61000 are used for ftp, TCP ports 22 and 32768 through 61000 for sftp, and TCP port 15740 and UDP port 5353 for connections to computers. File transfer may be blocked if the server firewall is not configured to allow access to these ports.
The Wireless Transmitter Utility The Wireless Transmitter Utility is used for pairing in image transfer and camera control modes (013) and can also help create network profiles. You can install the utility after downloading it from the following website: http://downloadcenter.nikonimglib.com/ Be sure to use the latest versions of the Wireless Transmitter Utility and the camera firmware.
Transfer, Control, and HTTP Ethernet Connections Follow the steps below to connect to a computer in image transfer, camera control, and http server modes. Image transfer Camera control HTTP server Install the Wireless Transmitter Utility (04) Step 1: Connect an Ethernet cable (06) For information on using the WT-6 or WT-5 to connect to wireless networks, see the manual provided with the device.
Step 1: Connecting an Ethernet Cable After starting the computer and logging in, ready the camera as described below. Do not turn the camera off or disconnect the Ethernet cable while data are being transferred to the computer. 1 Insert a memory card. Turn the camera off and insert a memory card. This step can be omitted in camera control mode (018). 2 Connect an Ethernet cable. Connect the Ethernet cable as shown below. Do not use force or insert the connectors at an angle.
3 Turn the camera on. Power switch Rotate the power switch to turn the camera on. A Connection Status Connection status is shown by the network indicator. Status Network indicator ● (off ) K (green) H (flashes green) H (flashes amber) Network indicator Network functions disabled (055) or Ethernet cable not connected. Waiting to connect. Connected. Error. A The Viewfinder Display Connection status is also shown in the camera viewfinder.
Step 2: Enabling the Ethernet Select the Ethernet as the network device used by the camera. 1 Select Choose hardware. In the setup menu, select Network, then highlight Choose hardware and press 2. The menu offers a choice of Wired LAN and Wireless LAN. 2 Select Wired LAN. Highlight Wired LAN and press J to select the highlighted option and return to the network menu. Step 3: The Connection Wizard Follow the on-screen instructions to create a network profile. 1 Display network profiles.
3 Start the connection wizard. Highlight Connection wizard and press 2 to start the connection wizard. 4 Choose a connection type (02). Highlight Image transfer, Camera control, or HTTP server and press J. 5 Name the new network profile. A default profile name will be displayed; to change the name as described in “Text Entry” (0 10), press the center of the multi selector. The profile name will appear in the Network > Network settings list in the camera setup menu.
A Text Entry The following dialog is displayed when text entry is required. Name area Keyboard area Keyboard selection To enter a new letter at the current cursor position, tap the letters on the touch-screen keyboard (tap the keyboard selection button to cycle through the upper-case, lower-case, and symbol keyboards).
6 Obtain or select an IP address. Highlight one of the following options and press J. • Obtain automatically: Select this option if the network is configured to supply the IP address automatically. • Enter manually: When prompted, enter an IP address and subnet mask by pressing 4 and 2 to highlight segments and 1 and 3 to change. Press J to proceed when entry is complete. 7 Choose your next step. The IP address will be displayed; press J.
8 Exit the wizard. Highlight one of the following options and press J. • Connect and exit wizard: Save the new network profile and connect to the server. • Exit wizard: Save the new network profile and exit. Proceed to “HTTP Server” (021). Step 4: Pairing If you selected Image transfer or Camera control in Step 4 of the connection wizard (09), pair the camera with the computer as described below. Pairing allows the computer to connect to the camera. 1 Connect the camera to the computer via USB.
2 Start the Wireless Transmitter Utility. When prompted, start the copy of the Wireless Transmitter Utility installed on the computer. Pairing will begin automatically. 3 Disconnect the camera. The message at right will be displayed when pairing is complete. Disconnect the USB cable. 4 Exit the wizard. Highlight one of the following options and press J. • Connect and exit wizard: Save the new network profile and connect to the server. • Exit wizard: Save the new network profile and exit.
Image Transfer Image transfer is used to upload photographs and movies to the computer from a camera memory card. The explanation that follows assumes that existing pictures are used. 1 Display network profiles. In the setup menu, select Network > Network settings to display the profiles list. Image transfer profiles are indicated by a K icon. Highlight a profile and press J to select the highlighted profile and return to the network menu. 2 Select Network connection.
4 View pictures. Press the K button to view pictures. Display the first picture to be sent in single-image playback or highlight it in the thumbnail list. 5 Upload pictures. Press J and the center of the multi selector. A white transfer icon will appear on the picture and upload will begin immediately. The transfer icon turns green during upload, and turns blue when upload is complete. Additional pictures will be uploaded in the order selected.
Interrupting Transmission/Removing Transfer Marking To cancel transmission of images marked with white or green transfer icons, select the images during playback and press J and the center of the multi selector. The transfer icon will be removed.
Transfer Status During playback, the status of images selected for upload is shown as follows: a: “Send” Images that have been selected for upload are marked with a white transfer icon. b: “Sending” A green transfer icon is displayed during upload. c: “Sent” Images that have been uploaded successfully are marked with a blue transfer icon. A Network Status Network status can be viewed in the top level of the network menu.
Camera Control Select this option to control the camera from a computer running Camera Control Pro 2 (available separately) and save photographs directly to the computer hard disk instead of the camera memory card (movies will still be saved to the camera memory card; insert a memory card before shooting movies). Note that the camera standby timer will not expire when the camera is in camera control mode. 1 Display network profiles.
3 Select Enable. Highlight Enable and press J to connect to the network and return to the network menu. The profile name will be displayed in green when a connection is established. 4 Start Camera Control Pro 2. Start the copy of Camera Control Pro 2 (available separately) installed on the host computer. For information on using Camera Control Pro 2, see the Camera Control Pro 2 manual (pdf ). A Firewall Settings TCP port 15740 and UDP port 5353 are used for host computer connections.
A Network Status Network status can be viewed in the top level of the network menu. Status area: The status of the connection to the host. The profile name is displayed in green when a connection is established. Errors are also displayed here (077). Signal strength: Wireless signal strength. Ethernet connections are shown by d.
HTTP Server Select HTTP server to view the pictures on the camera memory card or take photographs from the web browser on a computer or smart device (see page 26 for system requirements). Up to five users can access the camera at one time, although only one can take photographs or edit text. Note that the standby timer will not expire automatically when the camera is in http server mode. 1 Display network profiles. In the setup menu, select Network > Network settings to display the profiles list.
3 Select Enable. Highlight Enable and press J to connect to the network and return to the network menu. The URL used for connection to the camera is displayed when a connection is established. 4 Launch the web browser. Launch the web browser on the computer or smart device. 5 Enter the camera URL. Enter the camera URL (“http://” followed by the camera IP address, as shown in the network menu) in the browser window address field.
6 Log in. Enter your user name and password in the web browser login dialog (the user name and password are set using Network > Options > HTTP user settings in the network menu as described on page 62; the default user name is “nikon” while the default password is blank).
7 Choose a language. Click Language and choose the desired option. 8 Choose an operating mode. Choose Shooting/Viewer to take pictures (027, 34) and Shooting/Viewer or Viewer to view existing pictures (029, 36). To use the computer or smart device web browser to edit image comments and copyright and IPTC information stored on the camera, select Edit text (0 31, 38).
A Network Status Network status can be viewed in the top level of the network menu. Status area: The status of the connection to the host. The camera URL is displayed when a connection is established. Errors are also displayed here (077). Signal strength: Wireless signal strength. Ethernet connections are shown by d.
A HTTP Server System Requirements Operation has been confirmed with the following systems: OS Browser Graphics Windows Windows 10, Windows 8.1, Windows 7 • Windows 10: Microsoft Edge • Windows 8.1: Internet Explorer 11 • Windows 7: Internet Explorer 10 • Resolution: 1024 × 768 pixels (XGA) or more; 1280 × 1024 pixels or more recommended • Color: 24-bit color (True Color) or more Mac OS Browser Graphics OS X version 10.10, 10.9, or 10.8 • OS X version 10.10: Safari 8 • OS X version 10.
Computer and Android Web Browsers This section describes the http server displays for computer and Android web browsers (dialogs are shown with all buttons displayed for explanatory purposes). Click or tap to adjust camera settings. For information on the displays for iPhones, see page 34. ❚❚ The Shooting Window The following controls can be accessed by selecting Shooting/ Viewer on the server home page. To display the view through the camera lens in the viewfinder area, tap or click the live view button.
Contains the exposure indicator and shows the battery level and number of exposures remaining. Click or tap icons to adjust settings for photography or Camera settings movie recording. See the camera manual for details. Take a photograph or start and end movie recording. To Shutter button focus, click or tap the desired subject in the viewfinder area. Take a test photo and display it in the viewfinder Test button without recording it to the camera memory card. Not available in movie live view.
❚❚ The Viewer Window The viewer window can be accessed by selecting Viewer on the server home page or by clicking or tapping the view button in the shooting window. The viewer window offers a choice of thumbnail, film-strip (030), and full-frame views (030). Thumbnail View View multiple small (“thumbnail”) images per page. The controls at the top of the window can be used for navigation. Navigation controls Thumbnails (click or tap to view pictures full frame).
Film-Strip View Choose the picture displayed from the thumbnails at the bottom of the window. Current picture (click or tap H or F to view additional pictures) Copy current picture to computer or smart device Thumbnails (click or tap to select) Full-Frame View View pictures full frame.
❚❚ The Text Edit Window The text edit window, which is used to edit image comments and copyright and IPTC information stored on the camera, can be accessed by selecting Edit text on the server home page. Home button (0 24) Save button Logout button Image comment (0 32) Copyright information (0 32) IPTC information (0 33) Clear button D Saving Changes Changes are not saved automatically. Click or tap the save button to save changes.
Image Comment Create a comment that can be appended to subsequent images. Comments can be viewed as metadata in ViewNX-i or Capture NX-D. The following options are available: • Attach comment: Select this option to attach the comment to all subsequent photographs. • Input comment: Input a comment up to 36 characters long. Copyright Information Add copyright information to new photographs as they are taken. Copyright information can be viewed as metadata in ViewNX-i or in Capture NX-D.
IPTC Information Embed IPTC presets in photographs as they are taken. The following options are available: • Auto embed during shooting: Selecting this tab displays a list of IPTC presets; highlight a preset and press the save button to embed the selected preset in all subsequent photographs. Select Off to take photos with no IPTC presets. • Select IPTC preset: Selecting this tab displays a list of IPTC presets. Choose a preset to copy to the camera.
iPhone Web Browsers This section describes the http server displays for iPhone web browsers (dialogs are shown with all buttons displayed for explanatory purposes). Tap to adjust camera settings. For information on computer, Android, or iPad displays, see page 27. ❚❚ The Shooting Window The following controls can be accessed by selecting Shooting/ Viewer on the server home page. Use the live view button to start live view photography (C) or movie live view (1).
A Enabling Live View on the Camera When the view through the camera lens is displayed in the viewfinder area, pressing the camera a button will display the view through the lens in the camera monitor. Press the button again to end live view on the camera. A The Release Mode Button Rotating the camera release mode dial to S enables the release mode button, which can be used to choose from single-frame, high-speed continuous, and low-speed continuous release modes.
❚❚ The Viewer Window The viewer window can be accessed by selecting Viewer on the server home page or tapping the view button in the shooting window. The viewer window for iPhone web browsers offers a choice of thumbnail and full-frame views (037). Thumbnail View View multiple small (“thumbnail”) images per page. Folder selection Thumbnails per page View most recent pictures in folder Thumbnails (tap to view pictures full frame). Movies are indicated by 1; voice memos are listed as separate files.
Full-Frame View View pictures full frame.
❚❚ The Text Edit Window The text edit window, which is used to edit image comments and copyright and IPTC information stored on the camera, can be accessed by selecting Edit text on the server home page. Home button (0 24) Save button Logout button Image comment (0 32) Copyright information (0 32) IPTC information (0 33) Clear button D Saving Changes Changes are not saved automatically. Tap the save button to save changes.
FTP Ethernet Connections Follow the steps below to connect to an ftp server. FTP server Step 1: Connect an Ethernet cable (040) Step 2: Select Ethernet (041) Step 3: Run the connection wizard (041) For information on using the WT-6 or WT-5 to connect to wireless networks, see the manual provided with the device. Transfer pictures (045) D Choosing a Power Source To prevent the camera powering off unexpectedly during setup or data transfer, use a fully-charged battery or an optional AC adapter.
Step 1: Connecting an Ethernet Cable After starting the ftp server, connect the camera as described below. Do not turn the camera off or disconnect the Ethernet cable while data are being exchanged with the ftp server. 1 Insert a memory card. Turn the camera off and insert a memory card. 2 Connect an Ethernet cable. Connect the camera to the ftp server as shown below. Do not use force or insert the connectors at an angle. 3 Turn the camera on. Rotate the power switch to turn the camera on.
Step 2: Enabling the Ethernet Select the Ethernet as the network device used by the camera. 1 Select Choose hardware. In the setup menu, select Network, then highlight Choose hardware and press 2. The menu offers a choice of Wired LAN and Wireless LAN. 2 Select Wired LAN. Highlight Wired LAN and press J to select the highlighted option and return to the network menu. Step 3: The Connection Wizard Follow the on-screen instructions to create a network profile. 1 Display network profiles.
3 Start the connection wizard. Highlight Connection wizard and press 2 to start the connection wizard. 4 Choose a connection type. Highlight FTP upload and press J. 5 Name the new network profile. A default profile name will be displayed; to change the name, press the center of the multi selector (0 10). The profile name will appear in the Network > Network settings list in the camera setup menu. Press J to proceed to the next step when entry is complete.
7 Choose the server type. Highlight FTP or SFTP (secure ftp) and press J. 8 Enter the IP address. Press the center of the multi selector, enter the server URL or IP address (0 10) and press J, and then press J to connect. 9 Log in. Highlight one of the following options and press J. • Anonymous login: Select this option if the server does not require a user ID or password. • Enter user ID: Enter a user ID and password when prompted and press J.
10 Choose a destination folder. Highlight one of the following options and press J. • Home folder: Select this option to upload pictures to the server’s home folder. • Enter folder name: Select this option to upload pictures to another folder (the folder must already exist on the server). Enter a folder name and path when prompted and press J. 11 Exit the wizard. Highlight one of the following options and press J. • Connect and exit wizard: Save the new network profile and connect to the server.
FTP Upload Photos and movies can be uploaded from camera memory cards to an ftp server as described below, or photos can be uploaded as they are taken. For information on setting up an ftp server, see page 67. 1 Display network profiles. In the setup menu, select Network > Network settings to display the profiles list. FTP server profiles are indicated by a N icon. Highlight a profile and press J to select the highlighted profile and return to the network menu. 2 Select Network connection.
4 View pictures. Press the K button to view pictures. Display the first picture to be sent full frame or highlight it in the thumbnail list. 5 Upload pictures. Press J and the center of the multi selector. A white transfer icon will appear on the picture and upload will begin immediately. The transfer icon turns green during upload, and turns blue when upload is complete. Additional pictures will be uploaded in the order selected.
Uploading New Photographs as They Are Taken To upload new photographs as they are taken, select On for Network > Options > Auto send in the setup menu (061). Interrupting Transmission/Removing Transfer Marking To cancel transmission of images marked with white or green transfer icons, select the images during playback and press J and the center of the multi selector. The transfer icon will be removed.
Transfer Status During playback, the status of images selected for upload is shown as follows: a: “Send” Images that have been selected for upload are marked with a white transfer icon. b: “Sending” A green transfer icon is displayed during upload. c: “Sent” Images that have been uploaded successfully are marked with a blue transfer icon. A Network Status Network status can be viewed in the top level of the network menu.
Synchronized Release Synchronized release groups one master D5 camera with up to ten remote cameras and synchronizes the shutters on the remote D5 camera with the release on the master camera. The master and remote cameras must all be equipped with optional WT-6 or WT-5 wireless transmitters. Note that the standby timer will not expire automatically when the camera is in synchronized release mode.
Selecting Wireless LAN for Synchronized Release Select wireless LAN for all cameras that will be used in synchronized release mode. 1 Select Choose hardware. In the setup menu, select Network > Choose hardware. 2 Select Wireless LAN. Highlight Wireless LAN and press J to return to the network menu. Synchronized Release Options The following options are available for synchronized release: Group name, Master/remote, Remote camera check, and Number of remote cameras.
❚❚ Master Camera Configure the master camera as follows: Group Name Enter a group name of up to 16 characters (010). The master and remote cameras must all be in the same group. Master/Remote Select Master camera to designate the current camera as the master camera. Each group can have only one master; pressing the shutter-release button on the master releases the shutters on the remote cameras. Remote Camera Check Select On to check whether the remote cameras are ready.
❚❚ Remote Cameras Configure the remote cameras as follows: Group Name Enter a group name of up to 16 characters (010). The master and remote cameras must all be in the same group. Master/Remote Select Remote camera to designate the current camera as a remote camera. The shutters on the remote cameras will be released when the shutter-release button on the camera selected as the Master camera is pressed. Taking Pictures 1 Display network settings. In the setup menu, select Network > Network settings.
3 Select Network connection. Highlight Network connection and press 2. 4 Select Enable. Highlight Enable and press J to connect to the network and return to the network menu. 5 Take pictures. Pressing the shutter-release button on the master camera releases the shutters on the remote cameras. A Remote Camera Check If remote camera check (051) is on, warnings will be displayed if any of the remote cameras are not ready.
54
Menu Guide This section describes the items in the Network menu. Choose Hardware B setup menu ➜ Network Choose the network type (wired or wireless LAN, 0 2). Network Connection B setup menu ➜ Network Choose Enable to enable the network connection. Note that this increases the drain on the battery; Disable is recommended when the network is not in use.
Network Settings B setup menu ➜ Network Highlight Network settings and press 2 to display the network profiles list, where you can create new profiles or select an existing profile. ❚❚ The Profile List The camera can store up to nine network profiles. Highlight a profile and press J to connect to the highlighted host computer or ftp server, or press O (Q) to delete the highlighted profile (057). To view information on the highlighted profile, press L (Z/Q).
❚❚ Create Profile Choose Connection wizard to create network profiles with the help of a wizard (08, 41), Configure manually to enter ftp and http server settings manually (075). ❚❚ Copy to/from Card This option is available only with ftp and http server connections. Select Copy profile from card to copy profiles from the root directory of the memory card to the profile list.
❚❚ Editing Network Profiles To edit the profile currently highlighted in the profile list, press W (M) and choose from the following options: General Wireless TCP/IP FTP Edit the profile name and password (058). Edit wireless settings (wireless connections only; 059). Edit TCP/IP settings (060). Edit ftp settings (060). D Editing Profiles If the shutter-release button is pressed while menus are displayed, the monitor will turn off and any changes to the current profile will be lost.
Wireless Edit the following wireless settings: • SSID: Enter the name (SSID) of the network on which the host computer or ftp server is located. • Communication mode: Select Infrastructure for wireless communication via a wireless network access point, Access point to use the camera as an access point to connect to the ftp server or computer instead of connecting via a wireless network access point.
TCP/IP If the network is configured to supply IP addresses automatically, select Enable for Obtain automatically. Otherwise select Disable and enter the following information: • Address/Mask: Enter an IP address and subnet mask. • Gateway: If the network requires a gateway address, select Enable and enter the address supplied by the network administrator. • Domain Name Server (DNS): If a Domain Name Server exists on the network, select Enable and enter the address supplied by the network administrator.
Options B setup menu ➜ Network Edit the following settings. ❚❚ Auto Send If On is selected for image transfer or ftp server connections, photos will automatically be uploaded to the server as they are taken (note, however, that photos can only be taken when a memory card is inserted in the camera). Movies can not be uploaded using this option; transfer movies during playback as described on pages 14 and 45.
❚❚ Protect If Marked for Upload Select Yes to automatically protect files marked for upload to an ftp server. Protection is removed as the files are uploaded. ❚❚ Send Marking (FTP Upload Mode Only) Select On to add a timestamp to the pictures on the camera memory card giving the time of upload. The timestamp can be viewed using ViewNX-i or Capture NX-D. For more information, see online help for the software in question or the Capture NX-D manual.
❚❚ Power Saving Choose Prioritize network speed for faster network speeds, Prioritize power saving for reduced power consumption. Prioritize network speed ensures that LAN connections remain active even when data are not being exchanged with the server and allows Ethernet connections using the high-speed 1000BASE-T standard. Prioritize power saving limits Ethernet connections to 100BASE-TX and ensures that LAN connections are terminated automatically when data transfer ends.
64
Appendices Creating Profiles on a Computer The Wireless Transmitter Utility (04) can be used to create network profiles. 1 Connect the camera. Start the computer and connect the camera using the supplied USB cable as shown below. 2 Turn the camera on. Power switch Rotate the power switch to turn the camera on.
3 Start the Wireless Transmitter Utility. Double-click the Wireless Transmitter Utility icon on the desktop (Windows) or click the Wireless Transmitter Utility icon in the Dock (Mac). 4 Create a profile. Follow the on-screen instructions to create a network profile.
Creating an FTP Server Images can be uploaded to ftp servers created using the standard ftp services included with Windows 10 (Enterprise/Pro/Home), Windows 8.1, Windows 8.1 (Enterprise/Pro), and Windows 7 (Professional/Enterprise/Ultimate). Under Windows, Internet Information Services (IIS) are required to configure ftp servers (installation instructions are available from Microsoft).
2 Display the network adapter list. Click Change adapter settings. 3 Open the network properties dialog. If you are connecting via Ethernet, right-click Ethernet (Windows 8.1) or Local Area Connection (Windows 7) and select Properties. If you are connecting via a wireless LAN adapter, right-click Wi-Fi (Windows 8.1) or Wireless Network Connection (Windows 7) and select Properties.
4 Display TCP/IP settings. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties. 5 Enter an IP address and subnet mask. Enter an IP address and subnet mask for the ftp server and click OK.
6 Close the network properties dialog. Click Close. 7 Open Administrative Tools. Select System and Security > Administrative Tools in the Control Panel.
8 Open the IIS manager. Double-click Internet Information Services (IIS) Manager. 9 Select Add FTP Site…. Right-click the computer user name and select Add FTP Site….
10 Enter site information. Name the site and choose the path to the folder that will be used for ftp upload. Click Next to proceed. A Anonymous Login To allow anonymous login, select a folder in the user’s public folder as the content directory.
11 Choose binding and SSL options. Select the IP address entered in Step 5, note the port number, select Start FTP site automatically, and check No SSL. Click Next to proceed.
12 Choose authentication options. Adjust settings as described below and click Finish.
Manual Profile Creation Follow the steps below to manually configure the camera for connection to ftp and http servers. Note that changes to the current profile will be lost if the camera is turned off during setup; to prevent unexpected loss of power, use a fully-charged battery or an optional AC adapter. If you are connecting to an ftp server behind a firewall, you may also need to adjust firewall settings to create exceptions for the ftp ports used by the camera (ports 21, 22, and 32768 through 61000).
4 Select a connection type. Highlight FTP upload or HTTP server and press 2. 5 Adjust settings. Adjust settings as described in “Editing Network Profiles” (058). D Editing Profiles If the shutter-release button is pressed while menus are displayed, the monitor will turn off and any changes to the current profile will be lost. Choose a longer monitor off delay for Custom Setting c4 in the camera menus.
Troubleshooting Problem Solution Page Check settings for the host and/ or wireless LAN adapter and 8, 41, 58 adjust camera settings appropriately. 16, 19, 43 The camera displays a TCP/ Check firewall settings. IP or ftp error. Confirm that you can write to the destination folder on the ftp 74 server. Change the current PASV mode 60 setting. “Connecting to PC” does not clear from the camera Check firewall settings. 16, 19, 43 display.
Index Symbols G a: “Send” ............................................17, 48 b: “Sending” ......................................17, 48 c: “Sent”..............................................17, 48 A Gateway ..................................................... 60 Group name....................................... 51, 52 H Android OS .........................................26, 27 Authentication .........................................59 Auto send...................................................
P Pairing .........................................................12 Password protection..............................58 PASV mode ................................................60 Port number............. 3, 19, 43, 60, 73, 75 Power saving.............................................63 Profile name .......................................56, 58 Protect If marked for upload...............62 Proxy server...............................................60 R Remote camera check...........................
80
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. Network Guide Printed in Singapore SB5L01(11) 6MB29811-01 • Read this manual thoroughly before using the camera. • After reading this manual, keep it in a readily accessible place for future reference.
