Operation Manual

Clean the rollers

Using a dry cotton swab or a swab that

has been lightly dampened with water

and wrung out, clean the rollers while

turning the toothed wheel slowly in

either direction with the ball of your

thumb. Excessive force or the use of a

screwdriver or other rigid object could

damage the wheel. Dry the rollers with

a dry cotton swab or leave the roller

frame open until the rollers dry.

Toothed

wheel

Rollers

Roller

frame

Clean the sensors and feed mechanism

Remove dust from the interior of the

adapter with a blower. Clean the three

sensors and the feed mechanism thor-

oughly, changing the angle of the blow-

er to reach all parts of the mechanism.

Sensors

Caring for the MA-21 Slide-Mount Adapter

Storage

When the adapter is removed from the scanner, store it in a well-ventilated area where the

temperature is between –10 °C (14 °F) and +50 °C (+122 °F) and the humidity less than 60%.

Do not store the adapter where it would be subject to sudden temperature changes or con-

densation.

Cleaning

Use a blower or a soft dry cloth to remove dust, a soft cloth lightly dampened with neutral

detergent or liquid soap to remove tougher stains. Do not use alcohol or other volatile chemi-

cals.