Operation Manual

- 34 -
Appendix: Specifications
Film used: 35mm film (color/monochrome, negative/
positive)
Mounted slides (3.0mm or less and 1.1mm or
more in thickness)
Strip film (up to 6 images)
Scanning method:
Stepper-driven film stage, single pass method
Sensor: 2,592 pixel linear CCD image sensor
Light source: RGB LED Array
Color separation:
RGB line sequential
Scanning area: 24.3 x 36.5mm, 2,592 x 3,888 pixels.
Strip film holder aperture is 23.4 x 35.4mm.
Scanning resolution:
Pixel size: 9.4 micron square pixel
Pixel density: 106 pixels/mm, 2,700 dpi (on film surface)
A/D conversion: 12 bits/color
Output data: Full color (8 bits/color)
Focus: Auto-focus
Film holder: Not required for mounted slide scanning.
FH-2 is used for strip film scanning.
Interface: SCSI-2 compliant
Size: 6.0 (W) x 10.5 (H) x 2.5 (D) inches
(151 x 267.5 x 63.3mm)
Weight: Approx. 4.2lbs (1.9kg)
Power supply: AC 100 - 120V/AC 200 - 240V, 50/60Hz,
0.80 - 0.4A
Temperature: 50˚F – 95˚F (10˚C – 35˚C)
Humidity: 20% – 85% (no condensation)
Options: Nikon Auto Slide Feeder SF-100