Reference Manual (complete instructions)

Connecting to a Smart Device (SnapBridge)

Connecting the Camera and a Smart Device

4 Smart device: Launch the SnapBridge app and

tap Pair with camera.

• When the dialog to select a camera is displayed, tap the

camera you want to connect to.

• If you did not connect to the camera by tapping Skip at

the upper-right of the screen when launching the

SnapBridge app for the first time, tap Pair with camera in

the A tab and proceed to step 5.

5 Smart device: In the Pair with camera screen,

tap the camera name.

• For iOS, if a dialog explaining the procedure is displayed

when connecting, confirm the details and tap

Understood (if it is not displayed, scroll down the screen).

Tap the camera name again when the screen to select an

accessory is displayed (it may take some time for the

camera name to be displayed.).

6 Camera/smart device: Confirm that the camera and smart device

display the same number (six digits).

• For iOS, the number may not be displayed on the smart device depending on the

OS version. Proceed to step 7 in such cases.

Auth. code

123456

Confirm that the same

authentication code is

displayed on the smart

device and press OK.