Reference Manual (complete instructions)

15
Getting Started
Camera Setup
1 Press the power switch to turn on the camera.
• Use the flexible buttons and multi selector to select and adjust settings.
• A language selection dialog will be
displayed. Press JK on the multi
selector to highlight a language and
press flexible button 4 (O) to select.
• The language can be changed at any
time using the camera settings menu
(A112) M Language.
2 When the dialog at right is
displayed, follow the
instructions below and press
flexible button 4 (S) or flexible
button 3 (O).
• If you will not establish a wireless
connection with a smart device: Press
flexible button 4 (S) and proceed to step 3.
• If you will establish a wireless connection with a smart device: Press flexible button 3
(O). See “Connecting to a Smart Device (SnapBridge)” (A25) for information
about the setup procedure.
Camera Setup
Multi selector
Flexible button 1
Flexible button 2
Flexible button 3
Flexible button 4
RightLeft
Up
Down
Power switch
English
Language
Use SnapBridge to send photos
to your smart device and
share them online.
To skip this screen and
set SnapBridge later from
the Network menu, press X.