Reference Manual (complete instructions)

Getting Started

Inserting the Battery and Memory Card

1 Open the battery-chamber/memory card slot cover, and then

insert the battery and memory card.

• With the battery’s positive and negative terminals oriented correctly, move the

orange battery latch (4), and fully insert the battery (5).

• Slide the memory card in until it clicks into place (6).

• Be careful not to insert the battery or memory card upside-down or backward, as

this could cause a malfunction.

2 Close the battery-chamber/memory

card slot cover.

• Lay the cover completely flat in the direction

indicated by the arrow (1), and fully slide it in (2).

B Damage Caution

Sliding the cover while it is open may damage the

camera.

B Opening and Closing the Battery-chamber/Memory Card Slot Cover

Do not open and close the battery-chamber/memory card slot cover in a sandy or dusty

environment or with wet hands. If the cover is closed without removing foreign particles,

water may seep inside the camera or the camera may become damaged.

• If foreign particles get inside the cover or camera, immediately remove them with a

blower or brush.

• If liquid such as water gets inside the cover or camera, immediately wipe it off with a soft

and dry cloth.

Inserting the Battery and Memory Card

Battery latch Memory card slot