Reference Manual (complete instructions)

125
General Camera Setup
l Camera Settings
Charge by Computer
B Notes About Charging with a Computer
• When connected to a computer, the camera turns on and starts charging. If the camera is
turned off, charging stops.
• About 2 hours and 30 minutes are required to charge a fully exhausted battery. Charging
time increases when images are transferred while the battery is charging.
• The camera turns off automatically if there is no communication with the computer for 30
minutes after the battery has finished charging.
B When the Charge Lamp Quickly Flashes
Charging cannot be performed, possibly due to one of the reasons described below.
• The ambient temperature is not suited to charging. Charge the battery indoors with an
ambient temperature of 5°C to 35°C (41°F to 95°F).
• The USB cable is not connected correctly, or the battery is faulty. Make sure the USB cable
is connected correctly or replace the battery if necessary.
• The computer is in sleep mode and is not supplying power. Wake up the computer.
• The battery cannot be charged because the computer cannot supply power to the
camera due to the computer’s settings or its specifications.
Enter shooting mode or playback mode M flexible button 4 (l) M flexible
button 4 (l Camera settings) M press HI M g Charge by computer
Option Description
u Auto
(default setting)
When the camera is connected to a computer that is running
(A102), the battery inserted into the camera is automatically
charged using power supplied by the computer.
b Off
The battery inserted into the camera is not charged when the camera
is connected to a computer.