User Manual
Table Of Contents
- Introduction
- Parts of the Camera
- The Basics of Shooting and Playback
- Shooting Features
- Playback Features
- Recording and Playing Back Movies
- General Camera Setup
- Reference Section
- Using Panorama Assist
- Editing Still Images
- Connecting the Camera to a TV (Viewing Images on a TV)
- Connecting the Camera to a Printer (Direct Print)
- The Smart Portrait Menu
- The Shooting Menu (for Auto Mode)
- The Playback Menu
- The Movie Menu
- The Setup Menu
- File and Folder Names
- Optional Accessories
- Error Messages
- Technical Notes and Index
22
The Basics of Shooting and Playback
C Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power-on lamp will flash. If no operations are performed for approximately another
three minutes, the camera will turn off automatically.
While the camera is in standby mode, the monitor turns back on if you perform any of the following
operations:
➝ Press the power switch, shutter-release button, A (shooting mode) button, c (playback)
button, or b (e movie-record) button
• The time that elapses before the camera enters standby mode can be changed using the Auto off
setting in the setup menu (A 86).
• By default, the camera enters standby mode in about 30 seconds when you are using shooting
mode or playback mode.
9 70
970
1 5m 0 s
15m 0s
Flashes
No operations
performed
No operations
performed
3 min
Camera enters
standby mode.
Camera turns off.