Reference Manual (complete instructions)

168
Technical Notes
Troubleshooting
* See “Connecting to a Smart Device (SnapBridge)” (A23) and SnapBridge online help.
Nikon Transfer 2
does not start
when the camera
is connected to a
computer.
• The camera is off.
• The batteries are exhausted.
• The USB cable is not correctly connected.
• The camera is not recognized by the computer.
• The computer is not set to start Nikon Transfer 2
automatically. For more information about Nikon
Transfer 2, refer to help information contained in
ViewNX-i.
–
92
92, 99
–
–
Images to be
printed are not
displayed.
• The memory card contains no images.
• Remove the memory card to print images in the internal
memory.
–
12
Cannot select
paper size with
the camera.
The camera cannot be used to select the paper size in the
following situations, even when printing from a PictBridge-
compatible printer. Use the printer to select the paper size.
• The printer does not support the paper sizes specified by
the camera.
• The printer automatically selects the paper size.
–
Problem Cause/Solution A