Operation Manual

144 Chapter 15 — Edit List | Develop Section
Auto Red-Eye
The Auto Red-Eye tool automatically locates and removes red-eye from the current image.
Auto red-eye is applied immediately when the “Auto Red-Eye” dialog is displayed. Click Reset or uncheck
the “Apply” checkbox to prevent auto red-eye from changing your image.
Vignette Control
The Vignette Control tool can be used on NEF, JPEG, and
TIFF files and is used to correct for loss of marginal
lumination, a phenomenon associated with camera lenses
that causes a drop in brightness at the edges of a
photograph. Vignette control is most effective when
performed on images taken at maximum aperture.
If the picture in the active image window is a RAW image
taken with a lens equipped to transmit distance
information (a type G or D lens) mounted on a camera that
can record this information, Capture NX 2 will use the lens
information recorded with the image to automatically select an optimal range for the Intensity slider.
When this lens information is not available, the Intensity slider’s range will be based on default lens
characteristics. To determine whether a given combination of lens and camera will record distance
information, see the table below.
Camera Type G or D lens Any other type of lens
D1X/D1H
(firmware version 1.10 or later)
Distance Information
recorded
Distance Information
not recorded
D1X/D1H
(firmware version 1.01 or earlier)
Distance Information
not recorded
Distance Information
not recorded
D1
Distance Information
not recorded
Distance Information
not recorded
Other cameras
Distance information
recorded
Distance Information
not recorded
D-SLR ONLY