Operation Manual

Chapter 15 — Edit List | Develop Section 143
If Capture NX 2 locates more than one Image Dust Off reference photo within the same folder, you will
be presented with an options dialog to select which image to use. It is recommended that you select
the image that was taken as close to the time of the current image as possible.
For all other cameras, you will be presented with a folder search window to enable you to locate on your
computer’s hard drive a folder that contains an Image Dust Off reference photo.
• If Capture NX 2 locates more than one Image Dust Off reference photo within the same folder, you will
be presented with an options dialog to select which image to use. It is recommended that you select the
image that was taken as close to the time of the current image as possible.
Once you have located the correct Image Dust Off reference photo, click OK to apply the Image Dust Off
effect to your image.
If you would like to remove the Image Dust Off effect at any time, simply uncheck the “Apply” checkbox
next to Image Dust Off.
A Please note: If a large amount of dust is detected in the current image, Capture NX 2 will display a warning
stating that the results of Image Dust Off cannot be guaranteed. Click Ye s to proceed.
Auto Lateral Color Aberration
This tool automatically reduces lateral color aberration (colored fringes and halos) in RAW, JPEG, and TIFF
images. By default, this feature applies automatically to RAW (NEF and NRW) images but not to TIFF and
JPEG images. Use the “Apply” checkbox next to Auto Lateral Color Aberration in the Develop >
Camera & Lens Corrections section to toggle auto lateral color aberration on or off.
A Please note: This tool can not be used with RAW images recorded with the COOLPIX 8800, 8700, 8400, 5700,
5400, and 5000.
Axial Color Aberration
Reduce blurred colors caused by axial color aberration in RAW, JPEG, and TIFF images. This option is off by
default but can be enabled by checking the “Apply” checkbox next to Axial Color Aberration in the
Develop > Camera & Lens Corrections section. Moving the slider to the right increases the effect. To
hide the effect, remove the check from the “Apply” checkbox.
Auto Distortion
This option (available with images created using the COOLPIX P7000 or P7100 or a digital SLR camera
equipped with a type G or D lens) can be used to reduce barrel distortion in photographs taken with wide-
angle lenses and pin-cushion distortion in photos taken with telephoto lenses. Check the “Apply”
checkbox next to Auto Distortion in the Develop > Camera & Lens Corrections section and select
Automatic from the pull-down menu (this option will be checked automatically if the picture was taken
with On selected for the auto distortion control option in the camera shooting menu; if Off was selected
or the camera does not have an auto distortion control option, the option will not be checked). Note that
auto distortion control is not available with photographs taken using PC, fisheye, or certain other lenses or
with D1, D1X, D1H, or D100 cameras, images saved in JPEG or TIFF format using Save As with auto
distortion control applied, images taken with a digital SLR camera and On selected for auto distortion
control and an option other than NEF or NRW selected for image quality, or JPEG images taken with the
COOLPIX P7000/P7100.