Operation Manual

Chapter 15 — Edit List | Develop Section 133
Picture Control
Images from cameras that use the color mode system can
use either the Non-Picture Control mode or the Picture
Control mode. Images from cameras that use the Picture
Control system can only use the Picture Control mode.
The Picture Control options are available for cameras
that use both the color mode and Picture Control systems.
The controls provided within the Picture Control option
are:
❏ Picture Control Mode
Nikon’s unique Picture Control system makes it possible
to share image processing settings among compatible
devices and software. Picture Controls adjust image
processing settings, or enable you to make
independent adjustments to sharpening, contrast,
brightness, saturation, and hue. These settings can be
saved under new names as custom Picture Controls to
be recalled or edited at will.
Custom Picture Controls can also be saved to a memory
card for use in compatible software, and software-
created Picture Controls can be loaded into the camera. Any given set of Picture Controls will produce
nearly the same results on all cameras that support the Nikon Picture Control system.
The Picture Control option provides five different modes to choose from. Choose between:
Unchanged
This is available only for cameras that utilize the Picture Control system and
allows you to select the settings set within the camera at the time the image
was captured.
Standard Standard processing for balanced results.
Neutral Minimal processing for natural results.
Vivid Pictures are enhanced for a vivid, photoprint effect.
Monochrome Convert pictures to monochrome photographs.
Portrait Process portraits for skin with natural texture and a rounded feel.
Landscape Produces vibrant landscapes and cityscapes.
D2XMODE 1
D2XMODE 2
D2XMODE 3
A set of three optional Picture Controls that produce results similar to the
corresponding “Color mode” settings for the D2X and D2XS.
A Please note: The D2XMODE1, D2XMODE2, and D2XMODE3 options are not
displayed and can not be selected if the image is in NRW format or was created
using a camera that does not support Picture Control or D2XMODE1,
D2XMODE2, and D2XMODE3 options, or if Always use the latest Color
Reproduction Process is selected in the “Preferences” dialog of the Picture
Control Utility.