User's Manual

94
Chapter 15 Toolbar F6 - Selection Tools
sent the percent of opacity, and allow
you to set the maximum, the minimum,
and the midpoint values of the gradi-
ent. By moving the midpoint, you can
force transition of the gradient to shift
quickly on one side of the midpoint and
more gradually on the opposite side. To
reset this to default, simply remove any
values from these boxes.
Fill / Remove Tools
The Fill / Remove Tools enable you to
either fill or remove the current effect,
either in the entire image or an area
within a selection. The Fill / Remove
Tools are not accessible while working
within the Browser.
To fill the current step’s effect into the
image or selection, simply click on the
icon. To remove the current step’s
effect from the entire image or selec-
tion, click on the
icon.
Fill / Remove Options Dialog
The Fill / Clear Options can be accessed
by double-clicking on the
icon in the
Toolbar.
OPACITY
Changing the Opacity slider lets you
control whether or not the Fill or
Remove Tool will completely fill or
clear the effect from the current step.
When using a value lower than 100%
and then clicking on either the Fill or
Remove buttons, the effect will not be
completely filled or cleared from the
image. This enables you to remove or
add the effect from the current step to
a lesser degree.