Digital Camera User Manual

Moving subject is
expected to be in
focus
With a moving subjec t: Lightly press the shutter release
button. Focus Tracking is automatically activated with
~ •
indication
in the viewfinder. As soon as the subject is expected
to be in focus, ~ •• appears, indicating that you can release
shutter.
If subject stops and . appears without ~ . , focus is
locked. If subject moves again, remove your finger from the
shutter release button and lightly press
it again to start
autofocus with Focus Tracking.
, I I I ~
- ~ • - If ~ • blinks in the viewfinder: Autofocus is not
~ I I I' possible (p. 44).
• Single Servo AF with Focus-Priority is convenient for off-
center subjects. See pages 40
to 41 .
• After shooting with the film advance mode selector set
at
III , you do not have to remove your finger from the
shutter release button for the next shot. Slightly li
ft your
finger from the button (but maintaining the button
in the
half-depressed position) then fully depress it
to release
the shutter again. The focus setting will have remained
unchanged from the prior setting.
In the Single Servo AF
with Focus-Priority mode, focus remains locked even
after the shutter
is released, unless you remove your
finger from the shutter release button.
With film advance mode set at
I;5!!JH or I;5!!J L, camera
detects focus every time the shutter is released.
• With a moving subject, depending on subject status and
lens
in use, slightly out-of-focus pictures may result.
37