Digital Camera User Manual

'1 3D Matrix Metering is selected with D-type AF Nikkor lenses and Advanced Matrix Metering is
selected with non-D-type lenses .
'2
With maximum effective aperture of f15.6 or faster when using the TC-16A Autofocus Converter.
(See page 35) .
'3
With maximum aperture of f15.6 or faster.
'4 Set shutter speed to 11 125 sec. or slower.
'5 Because the diaphragm is coupled to the focusing ring, determining exposure is independent from
camera 's metering system .
'6
Some lenses cannot be attached to the N90 cameras. (See page 106).
7 Aperture cannot be selected.
'8 Set preset ring, then use AE - Iock lever before shifting.
'9 Set preset ring , then determine exposure before shifting .
'10 With AI- or AI - S-type Nikkor lenses having maximum aperture of f13.5 or faster. However, some
lenses cannot be used with the TC-16A (p.35) .
'
11 With maximum effective aperture ot t15.6 or taster .
'12 KI Ring cannot be attached to AF Nikkor lenses. The ring may damage CPU contacts. Use PK - II A
or BR-6 instead.
'13 PK -I, PK -2, PK -3 and PN-I Rings cannot be attached to the N90cameras. PK - II Ring cannot be
attached to AF Nikkor lenses . Those rings may damage CPU contacts. Use PK-II A tor AF Nikkor
lenses instead ot PK - II.
'14 Shutter should be released after exposure is measured by stopping down PB-6.
'15 Stop - down exposure measurement will be performed .
105