Digital Camera User Manual

TO USE NON-OX-CODED FILM
The usable range for manual film speed setting is ISO 6 to
6400.
Whi le pressing ISO l e", button, rotate command dial to set fi lm's
ISO number.
Film speed setting display changes as follows:
DX 6 8 10 12 16 20 25 32 40 50 64 80 100 125 160
200 250 320 400 500 640 800 1000 1250 1600 2000
2500 3200 4000 5000 6400
To check ISO number after film loading, press ISO l e", button.
100
IcS FS.6
EjH[!)Wf
IDJ ( II
rn=:J m _
..
IcS FS.6
0 0
:00
To check ISO number after film loading, press ISO / e~
button.
• If non-OX-coded film or film with
an unacceptable OX
code is loaded, the
Err , ISO and ffiJ marks blink in LCD
panel, beeper sounds, and shutter
is locked. You set
ISO manually.
• You can manua
ll y set film speed for a OX-coded film,
and the camera wi
ll automatically recognize the ISO
number set, whether
it is the higher, lower or actual ISO
number:
• With the Data Link System , you can set the camera to OX - Priority.