Operation Manual

Overview Using Camera Control Pro
Return to fi r s t page
80
Appendices
Device Registration
If D1-series cameras are not recognized by the computer to which Camera Control Pro is
installed, the camera or IEEE 1394 (FireWire) board may not be correctly registered with the
Windows Device Manager. To check whether a device is registered with the Device Man-
ager, click on the links below.
Windows XP
Professional/Home Edition
Windows 2000 Professional
Opening the Device Manager
Devices are registered with the Windows Device Manager. To open the Device Manager:
Windows XP: Select Control Panel from the Start menu to open the “Control Panel” window, then
click Performance and Maintenance icon to open the Performance and Maintenance control
panel. Click the System icon to open the System Properties window. Open the “Hardware tab”
and click Device Manager.
Windows 2000: Right-click the My Computer icon on the desktop and select Properties from the
menu that appears. In the “System Properties” dialog, open the “Hardware” tab and click the Device
Manager button.