Operation Manual

Using Camera Control Pro Appendices

Return to ﬁ r s t page

Overview

System Requirements Macintosh

Before installing Camera Control Pro, be sure that your system meets the following require-

ments:

CPU PowerPC G3/G4/G5

OS Mac OS X version 10.3.9 or later

Hard-disk space 50 MB required for installation, with an additional 1 GB of free disk space

available when Camera Control Pro is running

RAM 256 MB (768 MB or more recommended)

Video resolution 800 × 600 pixels or more with 16-bit color (High Color/thousands of colors).

24-bit color (True Color/millions of colors) recommended.

Interface

†

USB: Only built-in USB ports supported

FireWire: Only built-in FireWire ports supported

Supported cameras D1-series, D2-series, D100, D200, D70S, D70, D50

Miscellaneous • CD-ROM drive required for installation

• Internet connection required for Nikon Message Center

Operation not guaranteed on Intel-based Mac computers.

†

Connect the camera directly to the computer. The camera may not function as expected when

connected via a hub, extension cable, or keyboard.

Check the support information at the website below for the latest on compatible cameras

and operating systems.

Europe ,Africa:

www.europe-nikon.com/support

Asia, Oceania, Middle East:

www.nikon-asia.com

U.S.A.:

www.nikonusa.com

Additional information may be available from the Nikon representative in your area.

Visit

http://nikonimaging.com/

http://nikonimaging.com/ for contact information.