Operation Manual

Using Camera Control Pro Appendices

Return to ﬁ r s t page

Overview

System Requirements Windows

Before installing Camera Control Pro, be sure that your system meets the following require-

ments:

CPU 300 MHz Pentium or better recommended

OS Preinstalled versions of Windows XP Home Edition or Windows XP

Professional, Windows 2000 Professional

Hard-disk space 50 MB required for installation, with an additional 1 GB of free disk space

available when Camera Control Pro is running

RAM 256 MB (768 MB or more recommended)

Video resolution 800 × 600 pixels or more with 16-bit color (High Color/thousands of colors).

24-bit color (True Color/millions of colors) recommended.

Interface

USB: Only built-in USB ports supported

IEEE 1394: OHCI-compliant IEEE 1394 interface board or card required

†

Supported cameras D1-series, D2-series, D100, D200, D70S, D70, D50

Miscellaneous • CD-ROM drive required for installation

• Internet connection required for Nikon Message Center

Connect the camera directly to the computer. The camera may not function as expected when

connected via a hub, extension cable, or keyboard.

†

See the website below for the latest information on boards that have been tested and approved

for use.

Check the support information at the website below for the latest on compatible cameras

and operating systems.

Europe ,Africa:

www.europe-nikon.com/support

Asia, Oceania, Middle East:

www.nikon-asia.com

U.S.A.:

www.nikonusa.com

Additional information may be available from the Nikon representative in your area.

Visit

http://nikonimaging.com/

http://nikonimaging.com/ for contact information.